❌

Lees weergave

↗️

UniFi Network Application 10.6.101

✇Network Application
Door: UI-Glenn

Overview

UniFi Network Application 10.6.101 adds Drift Inspector, Topology Spotlight, and expanded Safe Ops features, along with the improvements and bug fixes listed below.

 

Added Drift Inspector to Blueprints in Site Manager

  • Make local changes to sites using Blueprint orchestrations, with a clear view of configuration drift and an easy way to resolve it.


Added Topology Spotlight

  • Quickly highlight and filter selected devices for easier navigation and troubleshooting in large topologies.


Improved SafeOps features

  • Expanded Test & Confirm support to VPN and Management networks.
  • Added Nightly Channel AI Optimization with configurable radio selection and an improved optimization algorithm.


Improved Time Machine Experience

  • Added Time Machine for Radios to review radio usage metrics, configuration changes, and radio events from the past 24 hours.
  • Expanded Port Manager Time Machine to All Ports, making it easier to identify and troubleshoot problematic network segments.

Improvements

  • Added a flapping devices filter to Port Manager Time Machine for clients with frequent reconnections.
  • Added the Reduced Firewall State Timeouts profile for EFG, EF-Core, and UXG-Enterprise.
  • Added a confirmation prompt when updating all devices from the Devices filter side panel.
  • Added sorting to Network Lists and descriptions on hover.
  • Added column sorting to tables in Settings Overview.
  • Added an Allow Empty Password option for RADIUS MAC Authentication.
  • Added the ability to disable the LCM screen on meshed UX7 devices.
  • Added Sort by Topology to the Devices page.
  • Added a notice for unsupported devices in Test & Confirm settings.
  • Added a disabled port filter to Port Manager.
  • Added an Additional Labels option to Infrastructure Topology.
  • Added a warning in Topology when Sonos devices with mixed wired and wireless connections are detected.
  • Added validation to prevent OpenVPN Server and Site-to-Site VPNs from using the same UDP port.
  • Added a Spotlight selection option in Topology.
  • Added the ability to disable insecure OpenVPN compression.
  • Added Multicast Suppressor support.
  • Requires UAP 8.8 or newer.
  • Added a Lock Port to UniFi Device option to Port Manager.
  • Requires Switch firmware version 7.6 or newer.
  • Added support for adopting multiple U5G devices on the same site over LAN.
  • Added support for using Domain Network Lists in QoS Policies.
  • Added support for customizing WAN interfaces used for Automatic Speed Tests.
  • Added Bulk Update Management to the Devices page.
  • Improved Device Auto-Recovery stability.
  • Improved Data Plane Protection resiliency.
  • Improved Traffic Activity Statistics accuracy.
  • Improved the Observability section.
  • Improved the device revert experience by allowing easy reversion for all devices with the same Device model and version.
  • Improved DHCP Options validation.
  • Improved the Dynamic DNS settings user experience.
  • Improved RADIUS settings validation.
  • Improved Virtual Network management in Topology.
  • Improved the AV Manager user experience.
  • Improved Honeypot validation.
  • Improved the display of unstable links in Infrastructure Topology.
  • Improved network subnet validation against static route destinations.
  • Improved Port Profiles management in Port Manager.
  • Improved Port Manager by automatically opening Time Machine.
  • Improved the Device Update confirmation screen by showing the number of connected devices that might be interrupted.
  • Improved OpenVPN server configuration files by removing periodic TLS key renegotiation.
  • Requires UniFi OS 5.1 or newer
  • Improved VPN Server settings validation.
  • Improved application startup resiliency.
  • Improved the Port Forwarding table user experience.
  • Removed the Network Override option for WAN-adopted U5G devices.
  • Removed the STP Edge note from Port Manager when Auto STP Edge is disabled.
  • Separated the Reset Stats and Clear Last Seen Device actions in Port Manager.
  • Enabled DHCP Guarding by default on new networks.


Bugfixes

  • Fixed an issue where client devices with a configured Power Source could be automatically enrolled in Device Auto-Recovery.
  • Fixed an issue where the AP Stopped Mesh system log could be generated repeatedly after an AP switched to a wired uplink.
  • Fixed an issue where the High Traffic alarm incorrectly reported wireless client downloads as uploads.
  • Fixed an issue where SD-WAN Mesh VPN tunnels could remain after the configuration was removed.
  • Fixed an issue where the client count in the WiFi Broadcast overview was incorrect when MLO clients were connected.
  • Fixed an issue where filter counters could flicker on the Connectivity page in rare cases.
  • Fixed an issue where the hostname was not set correctly for a UX7 connected via mesh.
  • Fixed an issue where a custom APN could be lost after moving a SIM between slots on a U5G.
  • Fixed an issue where the UX7 did not display connected wireless clients in the Devices list.
  • Fixed a rare issue where opening Client Observability could impact system stability.
  • Fixed an issue where DAS/DAC (CoA) was unavailable when using Open security with RADIUS MAC Authentication.
  • Fixed an issue where MC-LAG configurations could be lost after restoring a backup.
  • Fixed an issue where the Connectivity page was missing some roaming events.
  • Fixed a rare issue where adopting an LTE device could cause a gateway configuration error.

Additional information



 

UniFi OS Server


Going forward, we recommend users upgrade to UniFi OS Server for all self-hosted deployments. It provides the full UniFi OS Platform experience, ensuring you receive the latest features, improvements, and integrations.



UniFi Network Native Application for UniFi OS

Compatible with UDM, UDR, UDR7, UDR 5G Max, Express, Express 7, and UCG models (Ultra, Max, Fiber, and Industrial) on UniFi OS 3.1.6 or later. UDM-Pro, UDM-SE, and UDW have been using it since UniFi OS 5.1.5.

  • The UniFi OS update utilizes the application version compatible with your console.
  • The manual update process via SSH requires a compatible package. Incompatible packages will be rejected on installation.
  • Older UniFi OS versions (prior to UniFi OS 3.1.6) on the UDM and UDR continue to utilize the standard UniFi Network Application for UniFi OS.

 

 Checksums

c8c6398042ebc33a683c96850aa24b44 | UniFi-installer.exe
3128c428fa31641367b85c5c1b9b73a7 | UniFi-Network-Server.dmg
fe450c8e838c4fc3c93edaab901585f1 | UniFi.unix.zip
338929b19c8a14cb2f0db93906c1ad52 | unifi_sysvinit_all.deb
353b46578d3c008eb05e8eb9966d6be2 | unifi-uos_sysvinit.deb
4fd0700d012cf05323bea1684f409508 | unifi-native_sysvinit.deb
601df32736f41e40a80a3e472450a3e1 | unifi_sh_api


------------------------------------------------------------------------------------------------------------------------


75d6fda3b5b11722bda1e1f1680e7513e95de0862fa441ac30fb1b017fecf5ec | UniFi-installer.exe
62aae907b989a34392f82818ce339829b441d59d40643e7d3c8c78b8e3d08fbb | UniFi-Network-Server.dmg
18db9cbe4572de443df204ecf8ff30a906579058cc8d67dfba990ad163881477 | UniFi.unix.zip
b5ab809c2680b7ec22106ef19c7942f1fa343338c3eed1829303d95b2ce4fdd7 | unifi_sysvinit_all.deb
0e93972c1bc02aa2352812d84fa15cbb7433b6ec753308e706bd65068a2eda8d | unifi-uos_sysvinit.deb
00c8f461f576a03a6124abec433d2a71fcb854a6f07bebfa77f32cd32a9460e7 | unifi-native_sysvinit.deb
1791685039ea795970bcc7a61eec854058e3e6fc13c52770e31e20f3beb622eb | unifi_sh_api
  •  
  • ↗️
❌