❌

Normale weergave

Ontvangen — 15 Augustus 2026 ⏭ Network Application

UniFi Network Application 10.5.67

✇Network Application
Door: UI-Glenn
23 Juli 2026 om 21:49

Overview

UniFi Network Application 10.5.67 includes the improvements and bugfixes listed below.

 

Client Observability

Gain complete visibility into client behavior with a 24-hour activity timeline that correlates connectivity, roaming, application usage, and network health into a single troubleshooting experience.

  • Review a 24-hour time machine of client activity and events.
  • Track connection quality with signal strength, TX retries, latency, and packet loss.
  • Analyze roaming history and access-point performance affecting the client experience.

 

Safe Ops

Safe Ops introduces proactive protection and recovery mechanisms designed to reduce outages, maintain connectivity, and improve operational resilience across UniFi deployments.

  • Added Auto STP Edge that automatically sets ports connected to end devices as Edge.
  • Added Link Debounce controls to reduce link flapping caused by brief interruptions and unstable connections.
  • Requires USW 7.5.4 or newer.
  • Added Test & Confirm safeguards that automatically roll back changes if device connectivity is lost after configuration updates.
  • Available for Internet and Network settings. Wider support coming soon.
  • Requires UniFi OS 5.1.12 or newer
  • Added Data Plane Protection.
  • Enhanced Device Supervisor with global Auto-Recovery controls, including configurable health monitoring and recovery thresholds.

Improvements

  • Added information to CyberSecure settings when Safe Mode is active.
  • Added an option to clear the Auto STP Edge assigned status in Port Manager port settings.
  • Added Domain and Description fields to Network Lists.
  • Added Local Subnet configuration for policy-based IPsec Site-to-Site VPNs.
  • Added an “Advertise BGP to SD-WAN” option in BGP settings.
  • Added PPPoE 1500 MTU support.
  • Added a Duplicate action for Firewall Policies in the Policy Table.
  • Added Firewall Hit and Last Hit columns to the Firewall Policy table and predefined policy side panel.
  • Added column customization to the Radios page.
  • Added column sorting to Settings Overview.
  • Added sorting to OSPF and BGP neighbor tables.
  • Added warnings for client devices using private MAC addresses.
  • Added a warning when changing 6 GHz radio settings on an MLO mesh parent.
  • Added a Person filter to the Clients page.
  • Requires One-Click WiFi.
  • Added APs with wired downlinks to Infrastructure Topology.
  • Added uplink change and device update events to Infrastructure Topology.
  • Added third-party device connection events to the Infrastructure Topology timeline.
  • Added Last Seen information to anomaly tooltips in Port Manager.
  • Added customizable Power Cycle on Internet Loss behavior with configurable delay and single-cycle recovery per outage to prevent repeated modem resets during prolonged WAN outages.
  • Added a Hardware Acceleration option for UDM Beast.
  • Added an infrared status indicator for EAV Bridge.
  • Requires firmware version 1.0.9 or newer.
  • Added migration support from Suricata 6 to Suricata 8.
  • Requires UniFi OS 5.1.20 or newer.
  • The upgrade may take up to 1 hour after updating the Network Application.
  • On consoles with high resource usage, the automatic upgrade is skipped, and a manual upgrade option is available in CyberSecure settings.
  • Improved device adoption resiliency.
  • Improved Network Application stability under high load.
  • Improved the VPN settings user experience.
  • Improved VPN client configuration validation.
  • Improved validation when configuring BGP.
  • Improved IPsec policy-based routing configuration by excluding WireGuard and OpenVPN clients from Local Network selection.
  • Improved the offline device experience in Topology.
  • Improved the STP Blocked experience in Infrastructure Topology.
  • Improved Infrastructure Topology timeline events by grouping cascading device offline and online events while clearly identifying the top uplink.
  • Improved the U5G device side panel with more detailed status information.
  • Improved database upgrade resiliency against power loss.
  • Improved Hardware Acceleration validation to check only when Smart Queues or QoS are enabled.
  • Improved the CyberSecure section user experience.
  • Improved SD-WAN Underlay resiliency.
  • Improved the Network Lists user experience and validation.
  • Improved RADIUS Server validation.
  • Improved application stability.
  • Increased the EFG IDS/IPS VLAN limit from 25 to 64.
  • Reduced U5G eSIM data usage from WAN monitoring.
  • Restored maximum download and upload speed indicators on the Dashboard.

Bugfixes

  • Fixed the security issues mentioned in Security Advisory Bulletin 067.
  • Fixed an issue where WPA Enterprise SSIDs could fail to broadcast when using a stale RADIUS accounting secret.
  • Fixed an issue where the Virtual Network Override limit was applied to clients that did not have the feature enabled.
  • Fixed an issue where LTE Pro Failover could fail in rare cases.
  • Fixed an issue where sorting by Available IPs in Network settings did not work.
  • Fixed an issue where restoring a backup disabled hardware offloading on supported consoles.
  • Fixed an issue where USW Flex downlink devices could display an incorrect uplink in rare cases.
  • Fixed an issue where Captive Portal and internet access did not work on UX7 guest networks using non-Hotspot WiFi.
  • Fixed an issue where device name changes were not reflected in Update Manager while the device was offline.
  • Fixed an issue where Access Point settings could not be saved in rare cases.
  • Fixed an issue where Hotspot Managers could not access vouchers.
  • Fixed an issue where frequent connected and disconnected logs were shown for MC-LAG target members.
  • Fixed an issue where blocked client devices could remain blocked after removal, causing connectivity issues.
  • Fixed an issue where the Network Application could fail to reinstall on Cloud Key Gen2.
  • Fixed an issue where duplicate WAN settings could be created when adopting multiple U5G devices simultaneously.
  • Fixed an issue where the VLAN ID for inter-VLAN routing networks on third-party gateways could not be edited.
  • Fixed an issue where disabling a LAN port on UX7 could prevent configuration from being provisioned to other meshed access points.
  • Fixed an issue where AV Manager was not displayed when no switches were adopted on the site.
  • Fixed an issue where jumbo frames were not correctly applied to EF-Core LAG ports.
  • Fixed an issue where switches could fail to adopt in rare cases.

Additional information



 

UniFi OS Server


Going forward, we recommend users upgrade to UniFi OS Server for all self-hosted deployments. It provides the full UniFi OS Platform experience, ensuring you receive the latest features, improvements, and integrations.



UniFi Network Native Application for UniFi OS

Compatible with UDM, UDR, UDR7, UDR 5G Max, Express, Express 7, and UCG models (Ultra, Max, Fiber, and Industrial) on UniFi OS 3.1.6 or later. UDM-Pro, UDM-SE, and UDW have been using it since UniFi OS 5.1.5.

  • The UniFi OS update utilizes the application version compatible with your console.
  • The manual update process via SSH requires a compatible package. Incompatible packages will be rejected on installation.
  • Older UniFi OS versions (prior to UniFi OS 3.1.6) on the UDM and UDR continue to utilize the standard UniFi Network Application for UniFi OS.

 

 Checksums

43e063cd9eb23da43486d94b1c6d7ba4 | UniFi-installer.exe
7fa2a2772e99a118b76d1cc5ba3ad7e4 | UniFi-Network-Server.dmg
6fba2c86ab1cb4a7f1ac68daca6079bc | UniFi.unix.zip
0b53960adc6b24c1a9fe77c5cf7336d3 | unifi_sysvinit_all.deb
fb3fc1cd76cb2505fc2e77616e40e812 | unifi-uos_sysvinit.deb
521cb64de466f4fd9fa6a62261c1349c | unifi-native_sysvinit.deb
601df32736f41e40a80a3e472450a3e1 | unifi_sh_api


------------------------------------------------------------------------------------------------------------------------


0616709e512c75bfc8a37a75d412d71cacac8b98f4e443358fb163e38aa38829 | UniFi-installer.exe
45dc63df7811d03f08bf58b44b1b3dd7b90ed8a245269acec64a0343d1ec224c | UniFi-Network-Server.dmg
2121a1b4f115388387b73d9e443312779724422f5609bdbae8309efe0ca6672c | UniFi.unix.zip
ee3b99b95678be4e1d8b58e3826e8911531b12b32ee8bf1ea4b49fb7e76f9783 | unifi_sysvinit_all.deb
052d9ea00a6afaaf225c1c9d89b3c8d4f64143e468a319255a809440f5972211 | unifi-uos_sysvinit.deb
418a6f797994917af126449d9b0072666097c5a69dd795ae4b5e36ef39917e9e | unifi-native_sysvinit.deb
1791685039ea795970bcc7a61eec854058e3e6fc13c52770e31e20f3beb622eb | unifi_sh_api
  •  
  • ↗️

UniFi Network Application 10.5.66

✇Network Application
Door: UI-Glenn
22 Juli 2026 om 18:44

Overview

UniFi Network Application 10.5.66 includes the improvements and bugfixes listed below.

Improvements

  • Improved Auto STP Edge detection.
  • Improved Network Application stability.
  • Improved Control Plane protection detection stability.
  • Restored maximum download and upload speed indicators on the Dashboard.

Bugfixes

  • Fixed a rare issue where the Network Application could fail to start after reverting to an older version.

Additional information



 

UniFi OS Server


Going forward, we recommend users upgrade to UniFi OS Server for all self-hosted deployments. It provides the full UniFi OS Platform experience, ensuring you receive the latest features, improvements, and integrations.



UniFi Network Native Application for UniFi OS

Compatible with UDM, UDR, UDR7, UDR 5G Max, Express, Express 7, and UCG models (Ultra, Max, Fiber, and Industrial) on UniFi OS 3.1.6 or later. UDM-Pro, UDM-SE, and UDW have been using it since UniFi OS 5.1.5.

  • The UniFi OS update utilizes the application version compatible with your console.
  • The manual update process via SSH requires a compatible package. Incompatible packages will be rejected on installation.
  • Older UniFi OS versions (prior to UniFi OS 3.1.6) on the UDM and UDR continue to utilize the standard UniFi Network Application for UniFi OS.

 

 Checksums

74328b781d1a7dc235205ee3f0f965d4 | UniFi-installer.exe
7016318ae9a337fe34d04d88693ac2ff | UniFi-Network-Server.dmg
9a5148e91d8e4635ab74cd9b1c477d56 | UniFi.unix.zip
83def636c79b4b24a4addbb01ad64ba0 | unifi_sysvinit_all.deb
584c11e2b4db50b21da35757d17de200 | unifi-uos_sysvinit.deb
255f70436823c83670b9f96a3e16dfc9 | unifi-native_sysvinit.deb
601df32736f41e40a80a3e472450a3e1 | unifi_sh_api


------------------------------------------------------------------------------------------------------------------------


7cc3ff0fa9e9c94b80548c2b70145c502ba6bdc7c480ba19d61fb369261c5228 | UniFi-installer.exe
2171ecff57c1c26db6aeb536e8df850041d5f3c304e06202b88a8c683d41caff | UniFi-Network-Server.dmg
305fb51fc433cc47314dd08d426a4c451599f2341f0eab7c6e583897231a14ff | UniFi.unix.zip
e77a09985f917f377b477fa204198ae805c0e4aa273f879098b1a8d3677bd732 | unifi_sysvinit_all.deb
a919a6a90e8cd8f4030617d4657ac3fef125d3d4a5f735b6b994768774e91ccd | unifi-uos_sysvinit.deb
24a61d59e12381ddacae2d7c82ccebef2562da141e1ec6a3bcbfd3bec697e962 | unifi-native_sysvinit.deb
1791685039ea795970bcc7a61eec854058e3e6fc13c52770e31e20f3beb622eb | unifi_sh_api
  •  
  • ↗️

UniFi Network Application 10.5.62

✇Network Application
Door: UI-Glenn
13 Juli 2026 om 17:34

Overview

UniFi Network Application 10.5.62 includes the improvements and bugfixes listed below.

Improvements

  • Added information to CyberSecure settings when Safe Mode is active.
  • Added an option to clear the Auto STP Edge assigned status in Port Manager port settings.
  • Improved SD-WAN Underlay resiliency.
  • Improved the Network Lists user experience and validation.
  • Improved RADIUS Server validation.
  • Improved application stability.

Bugfixes

  • Fixed an issue where the STP column in Port Manager Time Machine did not reflect the correct state.
  • Fixed an issue where U-LTE adoption could trigger a gateway configuration error.
  • Fixed an issue where the Network Application could fail to start after upgrading to Network 10.5.57 on sites with a large number of Traffic Flows.
  • Upgrading from Network 10.5 versions may take up to 30 minutes on sites with a large number of Traffic Flows.
  • Fixed an issue where the Test & Confirm feature appeared as available on devices that did not meet the UniFi OS 5.1 requirement.
  • Fixed an issue where traffic flow retention was not properly enforced.
  • Fixed an issue where Firewall Blocked and Policy-Based Routing system logs were not forwarded to remote SIEM servers.
  • Fixed an issue where console memory usage could continue to grow if downloading Traffic Flows was canceled before completion.

Additional information



 

UniFi OS Server


Going forward, we recommend users upgrade to UniFi OS Server for all self-hosted deployments. It provides the full UniFi OS Platform experience, ensuring you receive the latest features, improvements, and integrations.



UniFi Network Native Application for UniFi OS

Compatible with UDM, UDR, UDR7, UDR 5G Max, Express, Express 7, and UCG models (Ultra, Max, Fiber, and Industrial) on UniFi OS 3.1.6 or later. UDM-Pro, UDM-SE, and UDW have been using it since UniFi OS 5.1.5.

  • The UniFi OS update utilizes the application version compatible with your console.
  • The manual update process via SSH requires a compatible package. Incompatible packages will be rejected on installation.
  • Older UniFi OS versions (prior to UniFi OS 3.1.6) on the UDM and UDR continue to utilize the standard UniFi Network Application for UniFi OS.

 

 Checksums

800f49d04e6229af77978f033f208da0 | UniFi-installer.exe
dd46f32720dbd010b3488dc79cbb058f | UniFi-Network-Server.dmg
4b14da8ed9693cf92a279e192576ea76 | UniFi.unix.zip
533e57bae6edc82557bf9b0e766dd2df | unifi_sysvinit_all.deb
2048a2499931191d0877a1d40e20811b | unifi-uos_sysvinit.deb
13947caa6256f181c8aea99ad62056a7 | unifi-native_sysvinit.deb
601df32736f41e40a80a3e472450a3e1 | unifi_sh_api


------------------------------------------------------------------------------------------------------------------------


8c786751d530a93743875e7adf44b46f1c8758bec8323efddd2f5a464e576e08 | UniFi-installer.exe
1117a7c5134dc6a29d9ec4f69333f4407dc928c397c0c8d995a50c0a560d4b91 | UniFi-Network-Server.dmg
aebf6f08a84308e004be4d355db37068b66155e1747dd149b42c410eb3d3ca67 | UniFi.unix.zip
65d4232eef35483a12aacb356c93a2f6f7b543caa2a6773bdce8b08f45a1956b | unifi_sysvinit_all.deb
ea159dc7957e2c8b05355106a3be552b4afb8212ff2945141ef94b5513b1d983 | unifi-uos_sysvinit.deb
e25010052d2cabdaf2f12843dde5795e1952e760ed4462296b46a049063f5d49 | unifi-native_sysvinit.deb
1791685039ea795970bcc7a61eec854058e3e6fc13c52770e31e20f3beb622eb | unifi_sh_api
  •  
  • ↗️

UniFi Network Application 10.5.54

✇Network Application
Door: UI-Glenn
25 Juni 2026 om 17:40

Overview

 

Client Observability

Gain complete visibility into client behavior with a 24-hour activity timeline that correlates connectivity, roaming, application usage, and network health into a single troubleshooting experience.

  • Review a 24-hour time machine of client activity and events.
  • Track connection quality with signal strength, TX retries, latency, and packet loss.
  • Analyze roaming history and access-point performance affecting the client experience.

 

Safe Ops

Safe Ops introduces proactive protection and recovery mechanisms designed to reduce outages, maintain connectivity, and improve operational resilience across UniFi deployments.

  • Added Auto STP Edge that automatically sets ports connected to end devices as Edge.
  • Added Link Debounce controls to reduce link flapping caused by brief interruptions and unstable connections.
  • Requires USW 7.5.4 or newer.
  • Added Test & Confirm safeguards that automatically roll back changes if device connectivity is lost after configuration updates.
  • Available for Internet and Network settings. Wider support coming soon.
  • Requires UniFi OS 5.1.12 or newer
  • Added Data Plane Protection.
  • Enhanced Device Supervisor with global Auto-Recovery controls, including configurable health monitoring and recovery thresholds.

Improvements

  • Added Domain and Description fields to Network Lists.
  • Added Local Subnet configuration for policy-based IPsec Site-to-Site VPNs.
  • Added an “Advertise BGP to SD-WAN” option in BGP settings.
  • Added PPPoE 1500 MTU support.
  • Added a Duplicate action for Firewall Policies in the Policy Table.
  • Added Firewall Hit and Last Hit columns to the Firewall Policy table and predefined policy side panel.
  • Added column customization to the Radios page.
  • Added column sorting to Settings Overview.
  • Added sorting to OSPF and BGP neighbor tables.
  • Added warnings for client devices using private MAC addresses.
  • Added a warning when changing 6 GHz radio settings on an MLO mesh parent.
  • Added a Person filter to the Clients page.
  • Requires One-Click WiFi.
  • Added APs with wired downlinks to Infrastructure Topology.
  • Added uplink change and device update events to Infrastructure Topology.
  • Added third-party device connection events to the Infrastructure Topology timeline.
  • Added Last Seen information to anomaly tooltips in Port Manager.
  • Added customizable Power Cycle on Internet Loss behavior with configurable delay and single-cycle recovery per outage to prevent repeated modem resets during prolonged WAN outages.
  • Added a Hardware Acceleration option for UDM Beast.
  • Added an infrared status indicator for EAV Bridge.
  • Requires firmware version 1.0.9 or newer.
  • Added migration support from Suricata 6 to Suricata 8.
  • Requires UniFi OS 5.1.20 or newer.
  • The upgrade may take up to 1 hour after updating the Network Application.
  • On consoles with high resource usage, the automatic upgrade is skipped, and a manual upgrade option is available in CyberSecure settings.
  • Improved device adoption resiliency.
  • Improved Network Application stability under high load.
  • Improved the VPN settings user experience.
  • Improved VPN client configuration validation.
  • Improved validation when configuring BGP.
  • Improved IPsec policy-based routing configuration by excluding WireGuard and OpenVPN clients from Local Network selection.
  • Improved the offline device experience in Topology.
  • Improved the STP Blocked experience in Infrastructure Topology.
  • Improved Infrastructure Topology timeline events by grouping cascading device offline and online events while clearly identifying the top uplink.
  • Improved the U5G device side panel with more detailed status information.
  • Improved database upgrade resiliency against power loss.
  • Improved Hardware Acceleration validation to check only when Smart Queues or QoS are enabled.
  • Improved the CyberSecure section user experience.
  • Increased the EFG IDS/IPS VLAN limit from 25 to 64.
  • Reduced U5G eSIM data usage from WAN monitoring.

Bugfixes

  • Fixed an issue where WPA Enterprise SSIDs could fail to broadcast when using a stale RADIUS accounting secret.
  • Fixed an issue where the Virtual Network Override limit was applied to clients that did not have the feature enabled.
  • Fixed an issue where LTE Pro Failover could fail in rare cases.
  • Fixed an issue where sorting by Available IPs in Network settings did not work.
  • Fixed an issue where restoring a backup disabled hardware offloading on supported consoles.
  • Fixed an issue where USW Flex downlink devices could display an incorrect uplink in rare cases.
  • Fixed an issue where Captive Portal and internet access did not work on UX7 guest networks using non-Hotspot WiFi.
  • Fixed an issue where device name changes were not reflected in Update Manager while the device was offline.
  • Fixed an issue where Access Point settings could not be saved in rare cases.
  • Fixed an issue where Hotspot Managers could not access vouchers.
  • Fixed an issue where frequent connected and disconnected logs were shown for MC-LAG target members.
  • Fixed an issue where blocked client devices could remain blocked after removal, causing connectivity issues.
  • Fixed an issue where the Network Application could fail to reinstall on Cloud Key Gen2.
  • Fixed an issue where duplicate WAN settings could be created when adopting multiple U5G devices simultaneously.
  • Fixed an issue where the VLAN ID for inter-VLAN routing networks on third-party gateways could not be edited.
  • Fixed an issue where disabling a LAN port on UX7 could prevent configuration from being provisioned to other meshed access points.
  • Fixed an issue where AV Manager was not displayed when no switches were adopted on the site.
  • Fixed an issue where jumbo frames were not correctly applied to EF-Core LAG ports.
  • Fixed an issue where switches could fail to adopt in rare cases.

Additional information



 

UniFi OS Server


Going forward, we recommend users upgrade to UniFi OS Server for all self-hosted deployments. It provides the full UniFi OS Platform experience, ensuring you receive the latest features, improvements, and integrations.



UniFi Network Native Application for UniFi OS

Compatible with UDM, UDR, UDR7, UDR 5G Max, Express, Express 7, and UCG models (Ultra, Max, Fiber, and Industrial) on UniFi OS 3.1.6 or later. UDM-Pro, UDM-SE, and UDW have been using it since UniFi OS 5.1.5.

  • The UniFi OS update utilizes the application version compatible with your console.
  • The manual update process via SSH requires a compatible package. Incompatible packages will be rejected on installation.
  • Older UniFi OS versions (prior to UniFi OS 3.1.6) on the UDM and UDR continue to utilize the standard UniFi Network Application for UniFi OS.

 

 Checksums

be4ad14755f20b411c3f24cabd1109bf | UniFi-installer.exe
70af1dd72936b7b9724a4d04c0a9fb36 | UniFi-Network-Server.dmg
cf7f13c9c0b2e746491053ad5e607bca | UniFi.unix.zip
0acc4e16fda6323b98deea2dac332943 | unifi_sysvinit_all.deb
9a96446ed056dee7ed1261282b4f8568 | unifi-uos_sysvinit.deb
05d38517b8b8a8afed4ba5f84f64a9be | unifi-native_sysvinit.deb
601df32736f41e40a80a3e472450a3e1 | unifi_sh_api


------------------------------------------------------------------------------------------------------------------------


8114218cb43c9efe2893d716f6f4464733391b4ce5c25e19ffaeffa936a798be | UniFi-installer.exe
49f4a93e293a54153a3588b3451af6dec877ff0edd8194062c595069c601fb50 | UniFi-Network-Server.dmg
4929bc1922724ef9065304c681596e87756248f56d7de4f19ac8b0a96a9fd7c7 | UniFi.unix.zip
11de8dea56f13e009a0e6ef0f66f07fe7970f6104910b9f320aaf4b3b3286985 | unifi_sysvinit_all.deb
a2a5c1e97895246ecf3aa1d43f8bd0d07b50d2c9c2d23f856af1686b955c5c3d | unifi-uos_sysvinit.deb
5c5981d4254e8f1f2741e73461d4fc390f267e439c02673513c85cea5e270282 | unifi-native_sysvinit.deb
1791685039ea795970bcc7a61eec854058e3e6fc13c52770e31e20f3beb622eb | unifi_sh_api
  •  
  • ↗️

UniFi Network Application 10.4.57

✇Network Application
Door: UI-Glenn
18 Mei 2026 om 15:32

Overview

UniFi Network Application 10.4.57 introduces enhanced routing and visibility features, including a new Routing experience with expanded Policy-Based Routing capabilities.


 

WAN Insights and WiFi Airtime Visibility

Expanded Dashboard visibility with new WiFi Airtime, Multicast, and WAN health insights, along with improved ISP and 5G monitoring through enhanced connectivity details, SLA visibility, and utilization metrics.



  • Added WiFi Airtime and Multicast activity graphs to the Dashboard.
  • Improved the WAN and ISP side panel with SLA, latency, packet loss, and utilization insights.
  • Expanded 5G and cellular connection visibility and diagnostics.
  • Requires U5G firmware 7.4.1 or newer.


 

Routing User Experience/FIB table

Introduced a centralized Routing view for managing and troubleshooting Static, OSPF, BGP, Connected, and Policy-Based routes, along with a unified FIB table that provides visibility into route destinations, next hops, interfaces, metrics, and routing sources across the gateway.

Improvements

  • Added a Tags column to the Devices page.
  • Added an Installation Date column to the Devices page.
  • Added a warning about data usage before running a Speed Test on 5G WAN.
  • Added an IPv6 Detection banner to the Dashboard.
  • Requires UniFi OS 5.1.8 or newer.
  • Added a Power Sources column to the device list.
  • Added Pro AV and Tagged VLAN columns to Port Manager.
  • Added warnings when VLAN tagging conflicts are detected.
  • Added Time Machine to Infrastructure Topology.
  • Added an option to configure Safe Shutdown Trigger Point and Auto-Recovery power cycle delay.
  • Requires UPS 1.4.30 or newer.
  • Added a suggestion in Infrastructure Topology to set devices as Edge to improve STP convergence.
  • Added a notice when saving Content Filtering exceptions that client-side DNS may cache entries for up to 1 hour.
  • Added support for using UXG-Fiber as an SD-WAN hub.
  • Added the ability to change the VPN gateway netmask when existing clients are present.
  • Added the ability to configure Static and Policy-Based Routes from the Routing section.
  • Added an STP column and filters to the Ports page.
  • Improved feedback in Port Manager and WiFi Broadcast settings when VLAN tagging conflicts are detected.
  • Improved validation for WireGuard IPv6 MTU and MSS settings.
  • Improved SSL certificate generation used in Deep Inspection.
  • Improved Remote Activity Logging by allowing configuration for Gateway, Switch, and Access Point logging.
  • Improved the VPN settings user experience.
  • Improved WiFi Broadcast settings.
  • Renamed Roaming Assistant to Handoff Suggestions (802.11v) and expanded support to 6 GHz.
  • Added new IoT optimization settings, including DTIM Interval Lock and Channel Lock options.
  • Replaced legacy IoT Mode with the new Force WiFi 4 compatibility option.
  • Improved IP display for meshed devices.
  • Improved the VPN connection user experience in the Clients section.
  • Improved Clients page performance when handling large amounts of offline clients.
  • Improved Site Magic connectivity.
  • Improved the Infrastructure Topology Time Machine user experience.
  • Improved the Reset Stats option in Port Manager.
  • It now also clears Last Seen devices.
  • Improved the Zone-Based Firewall policy reordering user experience.
  • Improved the Port Manager settings user experience.
  • Improved application resiliency.
  • Improved WiFi settings validation for Handoff Suggestions (6 GHz).
  • Disabled DNS Assistance when Captive Portal is enabled.
  • Moved Email Services to Control Plane Settings.
  • If a custom email service is used, it must be reconfigured in Control Plane after the update.

Bugfixes

  • Fixed an issue where view-only admins did not receive email notifications.
  • Fixed an issue where settings provisioning did not occur after device re-adoption in rare cases.
  • Fixed an issue where SD-WAN could fail to sync and new networks could not be created after applying a Blueprint in rare cases.
  • Fixed an issue where U-LTE settings could not be saved in rare cases.
  • Fixed an issue where IGMP Snooping settings could fail to be provisioned in rare cases.
  • Fixed an issue where Port Manager and Device settings could fail to save changes in rare cases.
  • Fixed an issue where flow control settings in Port Profiles could fail to save.
  • Fixed an issue where port forwarding on L3 networks in zone-based firewall rules did not work properly.
  • Fixed an issue where LTE backup settings in VLAN configuration were not respected in zone-based firewall rules in rare cases.
  • Fixed an issue where clients with only a fixed IP and no dynamic IP were missing from the IP table.
  • Fixed an issue where WAN3 port assignment could fail after restoring a backup.
  • Fixed a gateway configuration error when entering an invalid IPv6 range in network settings.
  • Fixed an issue where the UDB Pro mesh parent was not displayed in the side panel.
  • Fixed an issue where LCM night mode settings could fail to save in rare cases.
  • Fixed an issue where third-party clients were missing from Infrastructure Topology.
  • Fixed an issue where navigating to Channel AI could result in a dead end.
  • Fixed an issue where the Captive Portal did not work when connected to a UX7 in Mesh Mode.
  • Fixed an issue where the Etherlighting network option was missing.
  • Fixed an issue where some devices could fail to adopt via UniFi Auto-Link on Cloud Gateways with built-in WiFi when using a WiFi broadcast with a non-default network assigned.
  • Fixed an issue where Multicast Storm Control was not applied from Port Profiles when Pro AV QoS was not in use.
  • Fixed the security issues mentioned in Security Advisory Bulletin 066.

Additional information



 

UniFi OS Server


Going forward, we recommend users upgrade to UniFi OS Server for all self-hosted deployments. It provides the full UniFi OS Platform experience, ensuring you receive the latest features, improvements, and integrations.



UniFi Network Native Application for UniFi OS

Compatible with UDM, UDR, UDR7, UDR 5G Max, Express, Express 7, and UCG models (Ultra, Max, Fiber, and Industrial) on UniFi OS 3.1.6 or later. UDM-Pro, UDM-SE, and UDW have been using it since UniFi OS 5.1.5.

  • The UniFi OS update utilizes the application version compatible with your console.
  • The manual update process via SSH requires a compatible package. Incompatible packages will be rejected on installation.
  • Older UniFi OS versions (prior to UniFi OS 3.1.6) on the UDM and UDR continue to utilize the standard UniFi Network Application for UniFi OS.

 

 Checksums

1e8645bfc9679e64e2897e2c55f688ec | UniFi-installer.exe
27b4e4fc85bde4ac5f672a15825a5075 | UniFi-Network-Server.dmg
8d1c0d71632ddae780f9e45433b05790 | UniFi.unix.zip
68e0494402fd99b319d0d6573fdb80a3 | unifi_sysvinit_all.deb
87f15d4faf9938b25dc039bb0071cfb0 | unifi-uos_sysvinit.deb
6ab0ecb599fa20e69a0cfdf46ef08f01 | unifi-native_sysvinit.deb
601df32736f41e40a80a3e472450a3e1 | unifi_sh_api


------------------------------------------------------------------------------------------------------------------------


877458ef776a8dbcf2b605e63b3bd69b7f1cc84c8069b650ce97ee619a30cfcb | UniFi-installer.exe
9d6a698ce10643f9fb27c6ca29af346b0791179fba86def41498943162d686ca | UniFi-Network-Server.dmg
7fa8424ad1fc43778872cd14df5a7f70602573d296f4b5a933025fec6df4f2e4 | UniFi.unix.zip
fc378cf8cd2bec3d334bf7b72eabfcd1861e5fae67b9c16735471132105b2072 | unifi_sysvinit_all.deb
a365d0482b0c1eb61b7575689dc70bf93172ec0beb88ae767d115f2bf5db06f5 | unifi-uos_sysvinit.deb
3c500cdd562cbca630aca7f73a57b29d95bbfdee84302a5c23047b3dd36d7143 | unifi-native_sysvinit.deb
1791685039ea795970bcc7a61eec854058e3e6fc13c52770e31e20f3beb622eb | unifi_sh_api
  •  
  • ↗️

UniFi Network Application 10.3.58

✇Network Application
Door: UI-Glenn
22 April 2026 om 18:03

Overview

UniFi Network Application 10.3.58 includes the improvements and bugfixes below.

Improvements

  • Improved the resiliency for applying Orchestrations.

Bugfixes

  • Fixed an issue where Firewall Policies were not correctly ordered when using Blueprints.
  • Fixed an issue where DNS Assistance could be enabled for IoT WiFi Broadcasts.
  • Fixed incorrect port numbers in the Port Operation selector on certain switch models.
  • Fixed a dead-end for Hotspot Operators.
  • Fixed an issue where the Separate IKEv2 Networks setting for IPsec site-to-site VPNs could not be saved.
  • Fixed an issue where ports could be marked down even with an active connection.

Additional information



 

UniFi OS Server


Going forward, we recommend users upgrade to UniFi OS Server for all self-hosted deployments. It provides the full UniFi OS Platform experience, ensuring you receive the latest features, improvements, and integrations.



UniFi Network Native Application for UniFi OS

Compatible with UDM, UDR, UDR7, UDR 5G Max, Express, Express 7, and UCG models (Ultra, Max, Fiber, and Industrial) on UniFi OS 3.1.6 or later. UDM-Pro, UDM-SE, and UDW have been using it since UniFi OS 5.1.5.

  • The UniFi OS update utilizes the application version compatible with your console.
  • The manual update process via SSH requires a compatible package. Incompatible packages will be rejected on installation.
  • Older UniFi OS versions (prior to UniFi OS 3.1.6) on the UDM and UDR continue to utilize the standard UniFi Network Application for UniFi OS.

 

 Checksums

19e5a2ad44be8866119ee152195da712 | UniFi-installer.exe
c6ec7e0ce7d944cca96e244781325a43 | UniFi-Network-Server.dmg
22e4b77cf77bb62a6657ef7b83514810 | UniFi.unix.zip
a1d57fa83e455f7dfb82638c29d8d213 | unifi_sysvinit_all.deb
73b7d14b044c4ae5cc02fa7b1b1fab26 | unifi-uos_sysvinit.deb
126121607228611d8533fbe363ce3961 | unifi-native_sysvinit.deb
601df32736f41e40a80a3e472450a3e1 | unifi_sh_api


------------------------------------------------------------------------------------------------------------------------


24be339121a58508a4f6cb82fc9f18ae6065ec25950a59514140fc119e47a0de | UniFi-installer.exe
ef18e046e9667a12b9eb16d01e4e626ef80cd7440940a0f85d15a9af9d1f8b87 | UniFi-Network-Server.dmg
a3fd4da0e0b3b25a1aca67401cf39c724345914d3312f857591e9fa6865d1765 | UniFi.unix.zip
15571ff2110b2d2eb696962dafb9820af60828787f2514307b1a82df7941a78d | unifi_sysvinit_all.deb
fd62380ca5bac2aed10e102c996f385d6ca6176a7a786ba70982f2cd99f80772 | unifi-uos_sysvinit.deb
3279464e5284d43aa1d6505bc3186e6a83f09f02546d3973185452038cb10270 | unifi-native_sysvinit.deb
1791685039ea795970bcc7a61eec854058e3e6fc13c52770e31e20f3beb622eb | unifi_sh_api
  •  
  • ↗️

UniFi Network Application 10.3.55

✇Network Application
Door: UI-Glenn
16 April 2026 om 23:13

Overview

UniFi Network Application 10.3.55 adds Identity Firewall, Improves Device Monitoring, and includes additional improvements and bugfixes.


 

Identity Firewall

Create firewall rules using Identity Roles or individual users to enforce user-based access control independent of IP addresses. Enables consistent policy across devices and simplifies access management as users move between networks.

Requires UniFi OS 5.1 or newer.


 

Client Devices in Infrastructure Topology & Device Supervisor

Added client device support in Infrastructure Topology and enhanced monitoring for non-UniFi devices (e.g., servers, sensors). Device Supervisor can automatically restart unreachable devices and improves visibility in Topology and Digital Twin.

Improvements

  • Added OWE support to the WiFi Broadcast and LAG connection support to the Integration API.
  • Added a Device Supervisor filter to the Devices page.
  • Added a DNS Assistance setting to WiFi Broadcast settings to improve DNS resiliency and latency.
  • Requires Access Point firmware 8.6.2 or newer.
  • Added an IPv6 MSS option to VPN Client settings.
  • Added a device status indicator to system logs for multiple devices going offline.
  • Added support for configuring VLANs on UDB/UDB-Pro ports.
  • Added DNS Policy orchestration support.
  • Allowed specifying the method for IKEv2 reauthentication in IPsec VPN settings.
  • Improved MTU validation when IPv4 MSS is configured.
  • Improved IP range validation in QoS and Firewall settings.
  • Improved Time Machine event detection for Ports.
  • Improved the Ports Manager user experience.
  • Improved Port Forward validation to prevent overlap with IPsec site-to-site VPNs.
  • Improved Dashboard Internet statistics accuracy in rare cases.
  • Improved backup restore resiliency.
  • Improved the STP blocked link experience in Infrastructure Topology.
  • Improved WiFi Doctor-triggered device update speed and reliability.
  • Improved DS-Lite over PPPoE by provisioning the correct interface for firewall rules and displaying the correct WAN IPv6 address.
  • Improved the Guest Table to display voucher names.
  • Improved the VPN settings user experience.
  • Increased DS-Lite MTU by 8 bytes.

Bugfixes

  • Fixed an issue where devices were not reprovisioned when DHCP relay settings were changed.
  • Fixed an issue where packet capture status was not updated when opening an already running capture.
  • Fixed an issue where the UNVR was incorrectly shown in the Clients page when connected via an SFP port.
  • Fixed an issue where the Uplink column on the Devices page was not sorting correctly.
  • Fixed an issue where the IPv6 WAN default route on single-WAN gateways could be incorrectly applied.
  • Fixed an issue where the default route for static IPv6 WAN with a link-local next hop was not applied.
  • Fixed an issue where IGMP Snooping settings could fail to be provisioned in rare cases.
  • Fixed an issue where toggling “Mesh Connect” on a UDB Switch did not apply changes to the device.
  • Fixed an issue where the Port State in Port Manager could be incorrectly represented in rare cases.
  • Fixed an issue where VLAN tagging configuration for In-Wall Access Points could be incorrect in rare cases.
  • Fixed an issue where UDB devices could generate false Meshing system log messages.

Additional information



 

UniFi OS Server


Going forward, we recommend users upgrade to UniFi OS Server for all self-hosted deployments. It provides the full UniFi OS Platform experience, ensuring you receive the latest features, improvements, and integrations.



UniFi Network Native Application for UniFi OS

Compatible with UDM, UDR, UDR7, UDR 5G Max, Express, Express 7, and UCG models (Ultra, Max, Fiber, and Industrial) on UniFi OS 3.1.6 or later. UDM-Pro, UDM-SE, and UDW have been using it since UniFi OS 5.1.5.

  • The UniFi OS update utilizes the application version compatible with your console.
  • The manual update process via SSH requires a compatible package. Incompatible packages will be rejected on installation.
  • Older UniFi OS versions (prior to UniFi OS 3.1.6) on the UDM and UDR continue to utilize the standard UniFi Network Application for UniFi OS.

 

 Checksums

cb1c6c51e6c2b28f3f67c516a37671ae | UniFi-installer.exe
2800d36fbd01fa53863e7330dc818759 | UniFi-Network-Server.dmg
b57dc81418fcadab14ed99edb29cac4f | UniFi.unix.zip
e99d4a7679e5ae10a89c8b15741349e6 | unifi_sysvinit_all.deb
64adaeec485ff5c3e457cb41c9a9f5c0 | unifi-uos_sysvinit.deb
a663ddac5e5a55144dbdc145ea932708 | unifi-native_sysvinit.deb
601df32736f41e40a80a3e472450a3e1 | unifi_sh_api


------------------------------------------------------------------------------------------------------------------------


06b297e7b1d795ea74e2ab1a299f3b117d8c7460133e7cdba60333fb1d25e60a | UniFi-installer.exe
a74bb3841503f0159adc4217cf224d3a451c3342c0e25a20cf28a1b770a01a15 | UniFi-Network-Server.dmg
f523e5c5c906db3cf6c61dd376eb3d80525511ccc05889840ffd1a7234bb0ce9 | UniFi.unix.zip
da412257d6773e29db6c306134e835019eb5d54d9dacb1ada6673b0ba801fd2f | unifi_sysvinit_all.deb
a690f3ce7c522b83c69c8a889b4bc2f915f813c0bdc30703fa9d85ef238fda8b | unifi-uos_sysvinit.deb
0bcaafd394bc0c0d98b2ea25c4a467b42628ae4d3a88acee391cd48b36978fad | unifi-native_sysvinit.deb
1791685039ea795970bcc7a61eec854058e3e6fc13c52770e31e20f3beb622eb | unifi_sh_api
  •  
  • ↗️

UniFi Network Application 10.2.105

✇Network Application
Door: UI-Glenn
30 Maart 2026 om 18:39

Overview

UniFi Network Application 10.2.105 adds Port Manager Time Machine, improves the Topology, adds Device Supervisor, and includes additional improvements and bugfixes.


 

Port Manager Time Machine

Review the latest 24hr port activity to verify historical device connectivity and analyze anomalies for faster troubleshooting.


 


Infrastructure Topology & Digital Twin

Introduces a topology view focused on core infrastructure, providing clear visibility into key inter-switch and device bridge links. Includes a rack-level and customizable Digital Twin for physical-to-logical mapping and improved operational awareness.


 


Device Supervisor

Monitors UniFi device heartbeats and automatically power-cycles unresponsive devices via PoE switches or UniFi PDUs to restore connectivity with minimal downtime.

Improvements

  • Added the ability to easily revert device firmware to previous versions.
  • Added IPv6 support for WireGuard VPN.
  • Requires UniFi OS 5.1 or newer.
  • Added the ability to disable the buzzer sound on UPS devices.
  • Requires UPS firmware version 1.4.24 or newer.
  • Added an API endpoint to retrieve MC-LAG domain information.
  • Added ASN information to WAN-related System logs.
  • Added the ability to reposition lower Pages in the navigation panel.
  • Added keyboard arrow navigation across panels on the Device and Client pages.
  • Added a TX Retries column and a “Locked to AP” indicator on the Clients page, along with a filter for Clients locked to APs.
  • Added OWE support in WiFi settings for open networks.
  • Added a warning when using Fast Roaming with MLO in WiFi Broadcast settings.
  • Added support for all Admins to establish Teleport connections from the WiFiman app.
  • Added EAPOL exception for OWE guest networks in ebtables.
  • Added a safeguard to prevent mesh-connected U6-Extender and BeaconHD devices from disabling mesh connectivity.
  • Added Shadow Console in Digital Twin Rack View.
  • Improved Remote Logging to use the built-in SSD for remote logs when available.
  • Improved dashboard loading speed.
  • Improved PoE source detection for devices within Device Supervisor.
  • Improved the IGMP Snooping experience.
  • Use the management IP address for the querier when no querier address is configured.
  • Do not provision the querier address when IGMP Proxy is enabled.
  • Improved MSS IPv6 validation in VPN Server settings.
  • Improved the IGMP Querier selection user experience.
  • Improved the IGMP Snooping configuration user experience.
  • Improved the VPN Server, VPN Client, and overall VPN settings user experience.
  • Improved Flows processing performance.
  • Improved uptime sorting on the Device page.
  • Added BPDU Guard, which automatically disables ports if STP control frames are received to prevent loops.
  • Disabled ports require manual re-enablement.
  • BPDU Guard should not be enabled on ports connected to switches, APs, or gateways.
  • Requires UniFi Switch firmware 7.4 or newer.
  • Added STP Edge, which enables immediate forwarding on client-facing ports to speed up connectivity.
  • Requires UniFi Switch firmware 7.4 or newer.
  • Added the ability to configure Storm Control as a percentage.
  • Requires UniFi Switch firmware 7.4 or newer.
  • Improved the WiFi Doctor user experience.
  • Improved Dashboard details for device, application, and UniFi OS updates, including revert options.
  • Revert options require UniFi OS 5.1 or newer.
  • Improved grouping options by application on the Device page for large sites.
  • Improved overall application stability and resiliency.

Bugfixes

  • Fixed an issue where packet captures failed to start in some cases.
  • Fixed an issue where the default security posture was changed to Allow after an earlier upgrade.
  • You'll have to manually check your settings if you touched this setting while on 10.2; others should automatically recover.
  • Fixed an issue where View All Flows could result in an empty page.
  • Fixed an issue where WiFi Broadcast settings could fail to save in rare cases.
  • Fixed an issue where the VPN uptime stats could be missing for Site-to-Site VPN's.
  • Fixed an issue where the ISP Speed Test schedule appeared in the Device Update panel.
  • Fixed an issue where channel width could be mismatched when adopting wireless APs.
  • Fixed an issue where more Layer 3 networks could be created than supported on UniFi Switches.
  • Fixed an issue where Smart Queues were incorrectly limited to 1 GbE on UDM models.
  • Fixed an issue where Rogue AP Detected notifications could be missing.
  • Fixed an issue where WiFi Speed Limit settings were not displaying in rare cases.
  • Fixed the security issues mentioned in Security Advisory Bulletin 062.

Additional information



 

UniFi OS Server


Going forward, we recommend users upgrade to UniFi OS Server for all self-hosted deployments. It provides the full UniFi OS Platform experience, ensuring you receive the latest features, improvements, and integrations.



UniFi Network Native Application for UniFi OS

Compatible with UDM, UDR, UDR7, UDR 5G Max, Express, Express 7, and UCG models (Ultra, Max, Fiber, and Industrial) on UniFi OS 3.1.6 or later. UDM-Pro, UDM-SE, and UDW have been using it since UniFi OS 5.1.5.

  • The UniFi OS update utilizes the application version compatible with your console.
  • The manual update process via SSH requires a compatible package. Incompatible packages will be rejected on installation.
  • Older UniFi OS versions (prior to UniFi OS 3.1.6) on the UDM and UDR continue to utilize the standard UniFi Network Application for UniFi OS.

 

 Checksums

2f554e2071f216cce0d9332304547e43 | UniFi-installer.exe
d81f4f0ad7bd95188568bc23443a8709 | UniFi-Network-Server.dmg
f5459f747a9a3f12d34b22f4334a2024 | UniFi.unix.zip
709a94dd796f3e6cc1e70ddc9b3ad8fc | unifi_sysvinit_all.deb
2e3ebe57f2227a6a265f93abffb9fc43 | unifi-uos_sysvinit.deb
69975fd94ffc8f920b9b2f2db11b834e | unifi-native_sysvinit.deb
601df32736f41e40a80a3e472450a3e1 | unifi_sh_api


------------------------------------------------------------------------------------------------------------------------


ba46d1d1580ddabef4556e2d159d9872ab5cad48ad9a9bce897d04bf3a557d89 | UniFi-installer.exe
89835a6a97868b6fd835d0e8eefddb3cb8e79f8829a2d0c0957661186dfa5849 | UniFi-Network-Server.dmg
c500e17e91fdee8b50d11869c5260ed4586f3c95d2acf43a02fe5ab39ae02cc4 | UniFi.unix.zip
3014c5c4dc2b21bc7a50a65809c67e0636234a57ddc4beb43a07a2fdb6b83be5 | unifi_sysvinit_all.deb
39d4bd8ca21ce2f2d7a136a515145bfaf670dd1e62142a481c196cc48f201833 | unifi-uos_sysvinit.deb
acb47ee76d10ab769ea0c673eb20ef445a90d732ff720f62748dc51b38691949 | unifi-native_sysvinit.deb
1791685039ea795970bcc7a61eec854058e3e6fc13c52770e31e20f3beb622eb | unifi_sh_api
  •  
  • ↗️

UniFi Network Application 10.2.97

✇Network Application
Door: UI-Glenn
18 Maart 2026 om 19:53

Improvements

  • Added a safeguard to prevent mesh-connected U6-Extender and BeaconHD devices from disabling mesh connectivity.
  • Added Shadow Console in Digital Twin Rack View.
  • Improved Remote Logging to use the built-in SSD for remote logs when available.
  • Improved dashboard loading speed.
  • Improved PoE source detection for devices within Device Supervisor.
  • Improved the IGMP Snooping experience.
  • Use the management IP address for the querier when no querier address is configured.
  • Do not provision the querier address when IGMP Proxy is enabled.

Bugfixes

  • Fixed an issue where View All Flows could result in an empty page.
  • Fixed an issue where WiFi Broadcast settings could fail to save in rare cases.
  • Fixed an issue where the VPN uptime stats could be missing for Site-to-Site VPN's.
  • Fixed an issue where the ISP Speed Test schedule appeared in the Device Update panel.
  • Fixed the security issues mentioned in Security Advisory Bulletin 062.

Additional information



 

UniFi OS Server


Going forward, we recommend users upgrade to UniFi OS Server for all self-hosted deployments. It provides the full UniFi OS Platform experience, ensuring you receive the latest features, improvements, and integrations.



UniFi Network Native Application for UniFi OS

Compatible with UDM, UDR, UDR7, Express, Express 7, and UCG models (Ultra, Max, Fiber, and Industrial) on UniFi OS 3.1.6 or later. UDM-Pro, UDM-SE, and UDW have been using it since UniFi OS 5.1.5.

  • The UniFi OS update utilizes the application version compatible with your console.
  • The manual update process via SSH requires a compatible package. Incompatible packages will be rejected on installation.
  • Older UniFi OS versions (prior to UniFi OS 3.1.6) on the UDM and UDR continue to utilize the standard UniFi Network Application for UniFi OS.

 

 Checksums

ec62fcb5e6e808e9e3be4d64e71b06aa | UniFi-installer.exe
7c2eff15b5500534c15d370cf771b872 | UniFi-Network-Server.dmg
a6ea44052f8a7cf53866ac8b075c32ec | UniFi.unix.zip
746d7bd5b98251ca54b83af7707f20fc | unifi_sysvinit_all.deb
66a57b09cb33d5b9cda7ef614d3b2abd | unifi-uos_sysvinit.deb
4ca38ec1036f9632fc5e30f15e739162 | unifi-native_sysvinit.deb
601df32736f41e40a80a3e472450a3e1 | unifi_sh_api


------------------------------------------------------------------------------------------------------------------------


5e8e372dae48d5a9e811e55504f4c163878f3b35e12c5180c1293397426258e4 | UniFi-installer.exe
360ac6cdfd9cf000c8295ad5e89f79559d53d59a2473203496ad3c757d854dcd | UniFi-Network-Server.dmg
82cf1ecdd5d62f20bb7f7c8e7b52bb34be1a03a7393af6f742c2ab8fa4b0a7b9 | UniFi.unix.zip
3f69ad28da97137d7bb52b609c25d1a204cafe19bdcadb40233d04992e33831d | unifi_sysvinit_all.deb
155584290022dbfb821416568c3fefed3e7be8c779ec747033497cc1d8c0adcf | unifi-uos_sysvinit.deb
d616c1743c79de4c977986415d6e3fb891549baf7c698f30996ba160414b80ae | unifi-native_sysvinit.deb
1791685039ea795970bcc7a61eec854058e3e6fc13c52770e31e20f3beb622eb | unifi_sh_api
  •  
  • ↗️

UniFi Network Application 10.1.89

✇Network Application
Door: UI-Glenn
18 Maart 2026 om 19:53

Overview

UniFi Network Application 10.1.89 includes the bugfix below.

Improvements

  • Improved application stability.

Bugfixes


Additional information



 

UniFi OS Server


Going forward, we recommend users upgrade to UniFi OS Server for all self-hosted deployments. It provides the full UniFi OS Platform experience, ensuring you receive the latest features, improvements, and integrations.



UniFi Network Native Application for UniFi OS

A specific application version that is only compatible with the UDM, UDR, UDR7, Express, Express 7, UCG-Ultra, UCG-Max, and UCG-Fiber (running UniFi OS 3.1.6 or newer).

  • The UniFi OS update utilizes the application version compatible with your console.
  • The manual update process via SSH requires a compatible package. Incompatible packages will be rejected on installation.
  • Older UniFi OS versions (prior to UniFi OS 3.1.6) on the UDM and UDR continue to utilize the standard UniFi Network Application for UniFi OS.

 

 Checksums

bf9e0fcf851cc133c6a86aa3f13e01dd | UniFi-installer.exe
150a18bdab117613919985c15454678c | UniFi-Network-Server.dmg
0f27aeceb0c7937ebc7777e97e91ed57 | UniFi.unix.zip
cf3aaa7bb7396e9add1ad24d114242e4 | unifi_sysvinit_all.deb
119ef88dc16222cc1f8942c7143c7e8e | unifi-uos_sysvinit.deb
c585945fb2d544364b76757c24fceec1 | unifi-native_sysvinit.deb
601df32736f41e40a80a3e472450a3e1 | unifi_sh_api


------------------------------------------------------------------------------------------------------------------------


cc4e76db9be5ee5f904fa98e0ced4f84e7d8328da60bc1d3f4b57456503fb8ef | UniFi-installer.exe
6a3e7c5c971250d5f50b8fdd54e62483220204e4e47bb45ce280861c45ef6438 | UniFi-Network-Server.dmg
84416f86f6f30326fb87b8b9a487add6bb6a9419459512100e90e12ae5ff56e3 | UniFi.unix.zip
82d9c3afe0817a838aa88783c0a262c56e56db49637bb9f34780c2fc3fb54b7a | unifi_sysvinit_all.deb
f26584dcec62cc9d4dad5d6c29440116860037245bc64cf76a22380aefbe3a53 | unifi-uos_sysvinit.deb
e08ab879cae19f570f2028bbfb788116323425d00e745002b2921dff0d0b92ee | unifi-native_sysvinit.deb
1791685039ea795970bcc7a61eec854058e3e6fc13c52770e31e20f3beb622eb | unifi_sh_api


  •  
  • ↗️

UniFi Network Application 9.0.118

✇Network Application
Door: UI-Glenn
18 Maart 2026 om 19:53

Overview

UniFi Network Application 9.0.118 includes the improvement below.

Improvements

  • Improved application stability.

Bugfixes


Additional information

  • Create a backup before upgrading your UniFi Network Application if any issues are encountered.
  • See the UniFi Network Server Help Center article for more information on self-hosting a server.
  • UniFi Network Application 7.5 and newer requires MongoDB 3.6 and Java 17.
  • Version 7.5 to 8.0 supports up to MongoDB 4.4.
  • Version 8.1 and newer supports up to MongoDB 7.0.
  • Version 9.0 and newer supports up to MongoDB 8.0 and Java 17/21.
  • UniFi Network Application updates may cause your adopted devices to be re-provisioned.
  • Existing UniFi Network Applications must be on one of the following versions to upgrade directly to this version:
9.0.118 and earlier 9.0.x versions.
8.6.9 and earlier 8.6.x versions.
8.5.6 and earlier 8.5.x versions.
8.4.62 and earlier 8.4.x versions.
8.3.32 and earlier 8.3.x versions.
8.2.93 and earlier 8.2.x versions.
8.1.127 and earlier 8.1.x versions.
8.0.28 and earlier 8.0.x versions.
7.5.187 and earlier 7.5.x versions.
7.4.162 and earlier 7.4.x versions.
7.3.84 and earlier 7.3.x versions.
7.2.97 and earlier 7.2.x versions.
7.1.68 and earlier 7.1.x versions.
7.0.26 and earlier 7.0.x versions.
6.5.55 and earlier 6.5.x versions.
6.4.54 and earlier 6.4.x versions.
6.3.51 and earlier 6.3.x versions.
6.2.26 and earlier 6.2.x versions.
6.1.71 and earlier 6.1.x versions.
6.0.45 and earlier 6.0.x versions.
5.14.25 and earlier 5.14.x versions.
5.13.33 and earlier 5.13.x versions.
5.12.72 and earlier 5.12.x versions.
5.11.52 and earlier 5.11.x versions.
5.10.27 and earlier 5.10.x versions.
5.9.33 and earlier 5.9.x versions.
5.8.30 and earlier 5.8.x versions.
5.7.28 and earlier 5.7.x versions.
5.6.42 and earlier 5.6.x versions.
Most earlier versions are also supported for a direct upgrade, going back to 3.1.0.


UniFi Network Native Application for UniFi OS

A specific application version that is only compatible with the UDM, UDR, Express, UCG-Ultra, and UCG-Max (running UniFi OS 3.1.6 or newer).

  • The UniFi OS update uses the application version required for your console.
  • The manual update process via SSH requires you to use the compatible package. Incompatible packages will be rejected on installation.
  • Older UniFi OS versions (before UniFi OS 3.1.6) on the UDM and UDR still use regular UniFi Network Application for UniFi OS.

 

 Checksums

81e66efa421ad56e8dee35a8ad404ee7 | UniFi-installer.exe
f3ac73637dc0980bc5f9ca36f426fb24 | UniFi-Network-Server.dmg
3758763252e32a2f453fa138132d573e | UniFi.unix.zip
91c249dbb7ee34b8aa5d238cdc788edb | unifi_sysvinit_all.deb
3d8e4b53ab0e3cb3ef71f4173cd6e5c1 | unifi-uos_sysvinit.deb
dd5641a3f7f67ff0f09c9e99a5e58847 | unifi-native_sysvinit.deb
601df32736f41e40a80a3e472450a3e1 | unifi_sh_api


------------------------------------------------------------------------------------------------------------------------


6e283c9873ad97a14898aaf9b45faf759cf1c72b29a241567830ba0fe63d965f | UniFi-installer.exe
c98d7800dc33c4ec0f3ebbe9fbe953056b40ab4f83dac9cea2627c8c84469f43 | UniFi-Network-Server.dmg
1515d2f77bdd4fe3998e2deff2b28880187d5c7f70946759c7b4e854be6f50d7 | UniFi.unix.zip
63bc502dcaa64ab06d588c777f6f5464c69b0319597801a85cdf397d976bf81b | unifi_sysvinit_all.deb
2c0cb9b6ebe1641a169b3dd74d9a26bc53959fa17263a2c16db65a4f1159f752 | unifi-uos_sysvinit.deb
11f5641ac9e61428e0038d00863debea00a6708944d82b0f6dc865decf27ee56 | unifi-native_sysvinit.deb
1791685039ea795970bcc7a61eec854058e3e6fc13c52770e31e20f3beb622eb | unifi_sh_api
  •  
  • ↗️

UniFi Network Application 10.2.93

✇Network Application
Door: UI-Glenn
12 Maart 2026 om 18:02

Overview

UniFi Network Application 10.2.93 adds Port Manager Time Machine, improves the Topology, adds Device Supervisor, and includes additional improvements and bugfixes.


 

Port Manager Time Machine

Review the latest 24hr port activity to verify historical device connectivity and analyze anomalies for faster troubleshooting.


 


Infrastructure Topology & Digital Twin

Introduces a topology view focused on core infrastructure, providing clear visibility into key inter-switch and device bridge links. Includes a rack-level and customizable Digital Twin for physical-to-logical mapping and improved operational awareness.


 


Device Supervisor

Monitors UniFi device heartbeats and automatically power-cycles unresponsive devices via PoE switches or UniFi PDUs to restore connectivity with minimal downtime.

Improvements

  • Added the ability to easily revert device firmware to previous versions.
  • Added IPv6 support for WireGuard VPN.
  • Requires UniFi OS 5.1 or newer.
  • Added the ability to disable the buzzer sound on UPS devices.
  • Requires UPS firmware version 1.4.24 or newer.
  • Added an API endpoint to retrieve MC-LAG domain information.
  • Added ASN information to WAN-related System logs.
  • Added the ability to reposition lower Pages in the navigation panel.
  • Added keyboard arrow navigation across panels on the Device and Client pages.
  • Added a TX Retries column and a “Locked to AP” indicator on the Clients page, along with a filter for Clients locked to APs.
  • Added OWE support in WiFi settings for open networks.
  • Added a warning when using Fast Roaming with MLO in WiFi Broadcast settings.
  • Added support for all Admins to establish Teleport connections from the WiFiman app.
  • Improved the IGMP Snooping configuration user experience.
  • Improved the VPN Server, VPN Client, and overall VPN settings user experience.
  • Improved Flows processing performance.
  • Improved ptime sorting on the Device page.
  • Added BPDU Guard, which automatically disables ports if STP control frames are received to prevent loops.
  • Disabled ports require manual re-enablement.
  • BPDU Guard should not be enabled on ports connected to switches, APs, or gateways.
  • Requires UniFi Switch firmware 7.4 or newer.
  • Added STP Edge, which enables immediate forwarding on client-facing ports to speed up connectivity.
  • Requires UniFi Switch firmware 7.4 or newer.
  • Added the ability to configure Storm Control as a percentage.
  • Requires UniFi Switch firmware 7.4 or newer.
  • Added support for Fast Leave per port.
  • Requires UniFi Switch firmware 7.4 or newer.
  • Improved the WiFi Doctor user experience.
  • Improved Dashboard details for device, application, and UniFi OS updates, including revert options.
  • Revert options require UniFi OS 5.1 or newer.
  • Improved grouping options by application on the Device page for large sites.
  • Improved overall application stability and resiliency.

Bugfixes

  • Fixed an issue where channel width could be mismatched when adopting wireless APs.
  • Fixed an issue where more Layer 3 networks could be created than supported on UniFi Switches.
  • Fixed an issue where Smart Queues were incorrectly limited to 1 GbE on UDM models.
  • Fixed an issue where Rogue AP Detected notifications could be missing.
  • Fixed an issue where WiFi Speed Limit settings were not displaying in rare cases.

Additional information



 

UniFi OS Server


Going forward, we recommend users upgrade to UniFi OS Server for all self-hosted deployments. It provides the full UniFi OS Platform experience, ensuring you receive the latest features, improvements, and integrations.



UniFi Network Native Application for UniFi OS

A specific application version that is only compatible with the UDM, UDR, UDR7, Express, Express 7, UCG-Ultra, UCG-Max, and UCG-Fiber (running UniFi OS 3.1.6 or newer).

  • The UniFi OS update utilizes the application version compatible with your console.
  • The manual update process via SSH requires a compatible package. Incompatible packages will be rejected on installation.
  • Older UniFi OS versions (prior to UniFi OS 3.1.6) on the UDM and UDR continue to utilize the standard UniFi Network Application for UniFi OS.

 

 Checksums

b74c625fddb0d2333f9b11eedfa9ebb3 | UniFi-installer.exe
13743e06e35fb411504db32893ba0256 | UniFi-Network-Server.dmg
6e7e7e4d8c5dfc2626d96a0917319d70 | UniFi.unix.zip
885d26c35e6516f661fe0feb72dd0025 | unifi_sysvinit_all.deb
8d16e6681c8b28e335ca655379e477c2 | unifi-uos_sysvinit.deb
afb6067290b5a96d2f0dee2562590281 | unifi-native_sysvinit.deb
601df32736f41e40a80a3e472450a3e1 | unifi_sh_api


------------------------------------------------------------------------------------------------------------------------


03cb62bdd983f2d2b04cadc0d979d3b2323be2ad17aff3a64c0c9da44429d5d3 | UniFi-installer.exe
69128460a89603ce084505934782f1664b023442a8dc52734e26c9a607e11f06 | UniFi-Network-Server.dmg
ad42c4b4655d9cf9302b3cce57ea3d5d89101e7a3a110084357bca9af7bc6520 | UniFi.unix.zip
bce4b7ccea6f24a6c21cbc533abec6dfcb96fcdc9c0c48afed86f3822e9065a5 | unifi_sysvinit_all.deb
2acd9c120fa5f80ffc0e3ac1686b4ae42e087ec2891e461c0420879050da00ff | unifi-uos_sysvinit.deb
a6262e9b4b191608e3b5fc833ba83775ee484afae66d039013daca322e7cbb56 | unifi-native_sysvinit.deb
1791685039ea795970bcc7a61eec854058e3e6fc13c52770e31e20f3beb622eb | unifi_sh_api
  •  
  • ↗️

UniFi Network Application 10.1.85

✇Network Application
Door: UI-Glenn
11 Februari 2026 om 17:30

Overview

UniFi Network Application 10.1.85 includes the bugfix below.

Bugfixes

  • Fixed an issue where the Dashboard could fail to load in rare cases.

Additional information



 

UniFi OS Server


Going forward, we recommend users upgrade to UniFi OS Server for all self-hosted deployments. It provides the full UniFi OS Platform experience, ensuring you receive the latest features, improvements, and integrations.



UniFi Network Native Application for UniFi OS

A specific application version that is only compatible with the UDM, UDR, UDR7, Express, Express 7, UCG-Ultra, UCG-Max, and UCG-Fiber (running UniFi OS 3.1.6 or newer).

  • The UniFi OS update utilizes the application version compatible with your console.
  • The manual update process via SSH requires a compatible package. Incompatible packages will be rejected on installation.
  • Older UniFi OS versions (prior to UniFi OS 3.1.6) on the UDM and UDR continue to utilize the standard UniFi Network Application for UniFi OS.

 

 Checksums

4b83e647ce8a96b2ded381357d58553d | UniFi-installer.exe
039d57b5ceef37e17a12762b1e9213f3 | UniFi-Network-Server.dmg
b770e3ef1d0390d44980fbd6ab217e89 | UniFi.unix.zip
66315eab629f814a1afb67dbd636a0ee | unifi_sysvinit_all.deb
80f7c42b1a9e6b1e6561e178afee0cc4 | unifi-uos_sysvinit.deb
e4a3b578f169acb7042bc1d129d10392 | unifi-native_sysvinit.deb
601df32736f41e40a80a3e472450a3e1 | unifi_sh_api


------------------------------------------------------------------------------------------------------------------------


bcdfabe0599422699d5fde88d5f3072c71260969865144dfb23bc7b75f52529f | UniFi-installer.exe
dc8360eec7059b02835108ac424960d95940ba3e9dc277b08e53a908acc8cb55 | UniFi-Network-Server.dmg
162da943df0135be5cc74b45ecf716ce5f944ceeea6b9cac0c4e0759e7d0955a | UniFi.unix.zip
6e64e4d7b9f637bf9257e13dd02f31a1e155a13800e96857ef8eb03934a253a7 | unifi_sysvinit_all.deb
00100862711e914d56c897b4783d69c833c6148326573295bedbc162424918fc | unifi-uos_sysvinit.deb
50ee6483abbac7ef2a407b07feb4a5c3a2c9dab8def3c8de614e50bbd070cc32 | unifi-native_sysvinit.deb
1791685039ea795970bcc7a61eec854058e3e6fc13c52770e31e20f3beb622eb | unifi_sh_api


  •  
  • ↗️

UniFi Network Application 10.1.84

✇Network Application
Door: UI-Glenn
5 Februari 2026 om 14:36

Overview

UniFi Network Application 10.1.84 enhances high availability and system logging, adds new connectivity insights, and includes additional improvements and bugfixes.

 



Added Connectivity Insights

  • Added a new Connectivity section to the Radio view, visualizing client roaming journeys across access points.
  • Provides granular filtering by source and destination (signal strength, radio band, channel width, device tags, and more).
  • Helps identify AP density gaps and optimize assisted handoff for improved roaming and overall network performance.


 

Improved the High Availability setup user experience

  • Optimized Shadow Mode (VRRP) setup steps with more guided instructions.
  • Streamlined the MC-LAG configuration flow for a more straightforward setup.


 

Improved System Logs

  • Added an Audit filter with admin-based filtering.
  • Added logs for Access Point meshing.
  • Improved log categorization.
  • Introduced Client and Device filters.

Improvements

Radios

  • Added Total Multicast TX Packets in the AirView charts.
  • Added Access Point Filter to the Airview Radio section.
  • Added AirTime charts in the Radio section panels.
  • Added Avg. Interference and Avg. AirTime columns to the Radio page.
  • Added the Active Client distribution diagram in the Radio side panel.
  • Added packet capture results download as a text file or copy to the clipboard.


 


WiFi & Access Points

  • Added 6GHz WiFi experience in the AP side panel.
  • Added "Show Access Point name in Beacon" to the WiFi Settings.
  • Added Statistics Charts to the Access Points side panel's Insights tab.
  • Added a notice suggesting disabling Mesh Connect for Access Points with a Wired Uplink.
  • Added WiFi usage chart in the Clients page.
  • Added WiFi Doctor on the Dashboard.
  • Added confirmation tooltip for "Override All APs" in Roaming Assistant.
  • Added a Warning when changing from WPA3 to WPA2/3 Security in the WiFi settings.
  • Improved the user experience for the meshed AP side panel.
  • Improved the user experience for AirTime Utilization in the AP side panel.
  • Improved the Most Active Client widget in the AP side panel.
  • Improved the WiFi Broadcasting Settings user experience.
  • Moved the WiFi Client Ping test to the Client side panel.
  • Moved Wireless Client Airtime Graph to the Client side panel.
  • Moved AirTime charts to the AP Insights panel.
  • Moved Packet Capture to the Radio Section.


 


Dashboard

  • Added messaging to upgrade to UniFi OS Server on UniFi Network Servers.
  • Added Starlink Firmware status and obstructions details to the Dashboard.
  • Starlink router must be directly connected to the UniFi Gateway.
  • The 192.168.100.0/24 subnet cannot be used on the local network.
  • Added a notice about the available update to the Dashboard.
  • Improved the Dashboard user experience for multiple WAN setups.


 


Port Manager & Devices

  • Added the Release Notes button in the device table.
  • Added Device Model and Firmware Version details in the Port Manager left panel.
  • Added Port Warnings in the Port Side Panel Settings tab for better visibility.
  • Added device compliance information in the device side panel.
  • Allow clicking on the Connection Column to open the Client/Device panel in Port Manager.
  • Improved the Port Manager user experience for offline devices.


 


Networking, SD-WAN & VPN

  • Added support for MTU/MSS settings for SD-WAN, VPN Servers, and VPN Clients.
  • Added information for LAG ports to use the same speeds on both ends to prevent performance degradation.
  • Allow the UCG-Fiber to work as a Hub for SD-WAN.
  • Improved the Link Aggregation removal user experience.
  • Improved the MC-LAG user experience.


 


Validation & Safety

  • Added validation for Loopback IP addresses in the Network Settings.
  • Improved validation across the Settings pages.


 


API

• Added various new endpoints to the Network API:

  • Device Removal.
  • UniFi Device Adoption.
  • Wireless Device Adoption.
  • DNS policy creation and management.
  • Firewall policy creation and management.
  • Listing VPN servers and Site-to-Site tunnels.


 


Performance & Reliability

  • Added automatic removal of older firmware when new firmware is cached.
  • Improved latency for applying configuration changes.
  • Improved backup restore resiliency.
  • Improved application stability.


 

Others

  • Added sorting for the Hotspot Voucher table.
  • Added Device Tags.
  • Requires UniFi OS 5.0 or newer.
  • Added the option to expand Long List Filters to full height for better usability.
  • Added PDU Power Actions in Alarm Manager.
  • Improved the Topology user experience for larger setups.
  • Improved the AirTime Utilization charts user experience.
  • Improved the device adoption user experience.
  • Improved the user experience for configuring static IP addresses for devices.
  • Moved Network Lists and RADIUS Servers to the Networks settings.
  • Removed the Interface Refresh Rate Field setting.
  • It's now always automatically adjusted.
  • Removed the Network Application backup option.
  • You must now use the backup option within Control Plane.
  • Renamed DHCP Manager to IP Table.

Bugfixes

  • Fixed an issue where the LED settings weren't taking effect on some Access Points in rare cases.
  • Requires Access Point firmware 8.5.0 or newer.
  • Fixed an issue where the Guest Network option wasn't available on sites that don't use Zone-Based Firewall.
  • Fixed the inability to remove offline UPS devices.
  • Fixed an issue where users could configure RADIUS DAS/DAC when not all requirements were met.
  • Fixed an issue where not all places were using the same ISP logos.
  • Fixed an issue where the 5GHz Roaming Assistance toggle wasn't working correctly.
  • Fixed an issue where the WiFi blackout scheduler could incorrectly select specified time ranges in rare cases.
  • Fixed an issue where the Add Voucher button wasn't available for the Hotspot Operators.
  • Fixed inconsistent data reporting between the Network Application dashboard and the Site Manager ISP Viewer.
  • Fixed an issue where the WiFi MAC Filter values were cleared after toggling MAC Filtering.
  • Fixed an issue where System Statistics didn't report for 5G devices.
  • Fixed an issue where Intrusion Prevention could be disabled after suppressing signatures in rare cases.
  • Fixed an issue where Orchestration WiFi with PPSK enabled could fail to apply in rare cases.
  • Fixed an issue where the Clients page table could fail to display some columns in rare cases.
  • Fixed an issue where PPPoE settings might not display correctly in rare cases.

Additional information



 

UniFi OS Server


Going forward, we recommend users upgrade to UniFi OS Server for all self-hosted deployments. It provides the full UniFi OS Platform experience, ensuring you receive the latest features, improvements, and integrations.



UniFi Network Native Application for UniFi OS

A specific application version that is only compatible with the UDM, UDR, UDR7, Express, Express 7, UCG-Ultra, UCG-Max, and UCG-Fiber (running UniFi OS 3.1.6 or newer).

  • The UniFi OS update utilizes the application version compatible with your console.
  • The manual update process via SSH requires a compatible package. Incompatible packages will be rejected on installation.
  • Older UniFi OS versions (prior to UniFi OS 3.1.6) on the UDM and UDR continue to utilize the standard UniFi Network Application for UniFi OS.

 

 Checksums

759b1825b755b94fc2a2e216080fd62a | UniFi-installer.exe
95b015c96ed9e64af5a2b11f44afd02c | UniFi-Network-Server.dmg
377c762fdb0db7b254e43059948a0e75 | UniFi.unix.zip
82cc7b0a8660221ec9a07a8dce4e6e7a | unifi_sysvinit_all.deb
b358b41e39ff9591d392dd818d4b8f56 | unifi-uos_sysvinit.deb
61ad775725dbf2d5b41bb3e95af63f36 | unifi-native_sysvinit.deb
601df32736f41e40a80a3e472450a3e1 | unifi_sh_api


------------------------------------------------------------------------------------------------------------------------


0c41e4c5518ea4066556e7f075a8c14ab9117a4a0e8978c0b53a069a233bcb7d | UniFi-installer.exe
e094e9fe21cf746ab0e45110133b1298f347149203cbe33044d2ed683c2a98d3 | UniFi-Network-Server.dmg
20f07009a0680670de699f235d0bd10b03fb0891c67e256864cc22ea410832b9 | UniFi.unix.zip
187b1a11b1e1fadf0060eb5cd4b00caf258335dcf4d4401241d7e288fa764f71 | unifi_sysvinit_all.deb
da09ba20561e607c63ef78a4b43d7046c6b0f138116a0169ddefa26da429cce7 | unifi-uos_sysvinit.deb
e0fbc7b97bdadcb268d355890f7450790a88ca1c3ffcf1b88c4aadbce6a1bf9b | unifi-native_sysvinit.deb
1791685039ea795970bcc7a61eec854058e3e6fc13c52770e31e20f3beb622eb | unifi_sh_api


  •  
  • ↗️

UniFi Network Application 10.1.83

✇Network Application
Door: UI-Glenn
2 Februari 2026 om 12:37

Overview

UniFi Network Application 10.1.83 enhances high availability and system logging, adds new connectivity insights, and includes additional improvements and bug fixes.

 



Added Connectivity Insights

  • Added a new Connectivity section to the Radio view, visualizing client roaming journeys across access points.
  • Provides granular filtering by source and destination (signal strength, radio band, channel width, device tags, and more).
  • Helps identify AP density gaps and optimize assisted handoff for improved roaming and overall network performance.


 

Improved the High Availability setup user experience

  • Optimized Shadow Mode (VRRP) setup steps with more guided instructions.
  • Streamlined the MC-LAG configuration flow for a more straightforward setup.


 

Improved System Logs

  • Added an Audit filter with admin-based filtering.
  • Added logs for Access Point meshing.
  • Improved log categorization.
  • Introduced Client and Device filters.

Improvements

Radios

  • Added Total Multicast TX Packets in the AirView charts.
  • Added Access Point Filter to the Airview Radio section.
  • Added AirTime charts in the Radio section panels.
  • Added Avg. Interference and Avg. AirTime columns to the Radio page.
  • Added the Active Client distribution diagram in the Radio side panel.
  • Added packet capture results download as a text file or copy to the clipboard.


 


WiFi & Access Points

  • Added 6GHz WiFi experience in the AP side panel.
  • Added "Show Access Point name in Beacon" to the WiFi Settings.
  • Added Statistics Charts to the Access Points side panel's Insights tab.
  • Added a notice suggesting disabling Mesh Connect for Access Points with a Wired Uplink.
  • Added WiFi usage chart in the Clients page.
  • Added WiFi Doctor on the Dashboard.
  • Added confirmation tooltip for "Override All APs" in Roaming Assistant.
  • Added a Warning when changing from WPA3 to WPA2/3 Security in the WiFi settings.
  • Improved the user experience for the meshed AP side panel.
  • Improved the user experience for AirTime Utilization in the AP side panel.
  • Improved the Most Active Client widget in the AP side panel.
  • Improved the WiFi Broadcasting Settings user experience.
  • Moved the WiFi Client Ping test to the Client side panel.
  • Moved Wireless Client Airtime Graph to the Client side panel.
  • Moved AirTime charts to the AP Insights panel.
  • Moved Packet Capture to the Radio Section.


 


Dashboard

  • Added messaging to upgrade to UniFi OS Server on UniFi Network Servers.
  • Added Starlink Firmware status and obstructions details to the Dashboard.
  • Starlink router must be directly connected to the UniFi Gateway.
  • The 192.168.100.0/24 subnet cannot be used on the local network.
  • Added a notice about the available update to the Dashboard.
  • Improved the Dashboard user experience for multiple WAN setups.


 


Port Manager & Devices

  • Added the Release Notes button in the device table.
  • Added Device Model and Firmware Version details in the Port Manager left panel.
  • Added Port Warnings in the Port Side Panel Settings tab for better visibility.
  • Added device compliance information in the device side panel.
  • Allow clicking on the Connection Column to open the Client/Device panel in Port Manager.
  • Improved the Port Manager user experience for offline devices.


 


Networking, SD-WAN & VPN

  • Added support for MTU/MSS settings for SD-WAN, VPN Servers, and VPN Clients.
  • Added information for LAG ports to use the same speeds on both ends to prevent performance degradation.
  • Allow the UCG-Fiber to work as a Hub for SD-WAN.
  • Improved the Link Aggregation removal user experience.
  • Improved the MC-LAG user experience.


 


Validation & Safety

  • Added validation for Loopback IP addresses in the Network Settings.
  • Improved validation across the Settings pages.


 


API

• Added various new endpoints to the Network API:

  • Device Removal.
  • UniFi Device Adoption.
  • Wireless Device Adoption.
  • DNS policy creation and management.
  • Firewall policy creation and management.
  • Listing VPN servers and Site-to-Site tunnels.


 


Performance & Reliability

  • Added automatic removal of older firmware when new firmware is cached.
  • Improved latency for applying configuration changes.
  • Improved backup restore resiliency.
  • Improved application stability.


 

Others

  • Added sorting for the Hotspot Voucher table.
  • Added Device Tags.
  • Requires UniFi OS 5.0 or newer.
  • Added the option to expand Long List Filters to full height for better usability.
  • Added PDU Power Actions in Alarm Manager.
  • Improved the Topology user experience for larger setups.
  • Improved the AirTime Utilization charts user experience.
  • Improved the device adoption user experience.
  • Improved the user experience for configuring static IP addresses for devices.
  • Moved Network Lists and RADIUS Servers to the Networks settings.
  • Removed the Interface Refresh Rate Field setting.
  • It's now always automatically adjusted.
  • Removed the Network Application backup option.
  • You must now use the backup option within Control Plane.
  • Renamed DHCP Manager to IP Table.

Bugfixes

  • Fixed an issue where the LED settings weren't taking effect on some Access Points in rare cases.
  • Requires Access Point firmware 8.5.0 or newer.
  • Fixed an issue where the Guest Network option wasn't available on sites that don't use Zone-Based Firewall.
  • Fixed the inability to remove offline UPS devices.
  • Fixed an issue where users could configure RADIUS DAS/DAC when not all requirements were met.
  • Fixed an issue where not all places were using the same ISP logos.
  • Fixed an issue where the 5GHz Roaming Assistance toggle wasn't working correctly.
  • Fixed an issue where the WiFi blackout scheduler could incorrectly select specified time ranges in rare cases.
  • Fixed an issue where the Add Voucher button wasn't available for the Hotspot Operators.
  • Fixed inconsistent data reporting between the Network Application dashboard and the Site Manager ISP Viewer.
  • Fixed an issue where the WiFi MAC Filter values were cleared after toggling MAC Filtering.
  • Fixed an issue where System Statistics didn't report for 5G devices.
  • Fixed an issue where Intrusion Prevention could be disabled after suppressing signatures in rare cases.
  • Fixed an issue where Orchestration WiFi with PPSK enabled could fail to apply in rare cases.

Additional information



 

UniFi OS Server


Going forward, we recommend users upgrade to UniFi OS Server for all self-hosted deployments. It provides the full UniFi OS Platform experience, ensuring you receive the latest features, improvements, and integrations.



UniFi Network Native Application for UniFi OS

A specific application version that is only compatible with the UDM, UDR, UDR7, Express, Express 7, UCG-Ultra, UCG-Max, and UCG-Fiber (running UniFi OS 3.1.6 or newer).

  • The UniFi OS update utilizes the application version compatible with your console.
  • The manual update process via SSH requires the use of a compatible package. Incompatible packages will be rejected on installation.
  • Older UniFi OS versions (prior to UniFi OS 3.1.6) on the UDM and UDR continue to utilize the standard UniFi Network Application for UniFi OS.

 

 Checksums

5f082bbae109e3ca3dcc9ad9ddce60a1 | UniFi-installer.exe
b9492909efcabd785ceeedabb1fb41fc | UniFi-Network-Server.dmg
aa7cc5119c4af919512f23bb4764606b | UniFi.unix.zip
09066e92c85b41a1d1fbb048036c7864 | unifi_sysvinit_all.deb
c5bec9f7a00a7e3ab85d4c3d1711707b | unifi-uos_sysvinit.deb
6b44af9a906145b6eec0fc24e68a3f99 | unifi-native_sysvinit.deb
601df32736f41e40a80a3e472450a3e1 | unifi_sh_api


------------------------------------------------------------------------------------------------------------------------


694f819feaeff6a7f897256805ff49e80ca8b775a22622ac4409d248aa7d18de | UniFi-installer.exe
967f80cfb46e57415cf3f8ae6784944eab96d7ca74c07e77d312746ecbf82fbc | UniFi-Network-Server.dmg
df7a918e78a1196817d518642940a1d5a085fe4b5e8c97dba6026650bbf22e75 | UniFi.unix.zip
5fc78210cfa1dad7254f82c6abd5730363a614a17a2d5cc200b61273b07fd8d5 | unifi_sysvinit_all.deb
c7128785c90e14a765c350787626c823f73b7e3a2108dba864e82a7b4b825442 | unifi-uos_sysvinit.deb
45ec24a23df3fcec0f98beada0c56bee86ebae4c0a8deb4ddd94adb0741b8f94 | unifi-native_sysvinit.deb
1791685039ea795970bcc7a61eec854058e3e6fc13c52770e31e20f3beb622eb | unifi_sh_api


  •  
  • ↗️

UniFi Network Application 10.0.162

✇Network Application
Door: UI-Glenn
4 December 2025 om 16:02

Overview

UniFi Network Application 10.0.162 includes the bugfix listed below.

Bugfixes

  • Fixed an issue where the WiFi blackout scheduler could incorrectly select specified time ranges in rare cases.
  • Fixed an issue where LAG connections could fail to establish on UXG-Enterprise/EFG in rare cases.
  • Fixed an issue where WAN monitoring wasn't working for DS-Lite over PPPoE in rare cases.


Additional information

  • Create a backup before upgrading your UniFi Network Application if any issues are encountered.
  • See the UniFi Network Server Help Center article for more information on self-hosting a server.
  • UniFi Network Application 7.5 and newer requires MongoDB 3.6 and Java 17.
  • Version 7.5 to 8.0 supports up to MongoDB 4.4.
  • Version 8.1 and newer supports up to MongoDB 7.0.
  • Version 9.0 and newer supports up to MongoDB 8.0 and Java 17/21.
  • UniFi Network Application updates may cause your adopted devices to be re-provisioned.
  • Existing UniFi Network Applications must be on one of the following versions to upgrade directly to this version:
10.0.162 and earlier 10.0.x versions.
9.5.21 and earlier 9.5.x versions.
9.4.19 and earlier 9.4.x versions.
9.3.45 and earlier 9.3.x versions.
9.2.87 and earlier 9.2.x versions.
9.1.120 and earlier 9.1.x versions.
9.0.114 and earlier 9.0.x versions.
8.6.9 and earlier 8.6.x versions.
8.5.6 and earlier 8.5.x versions.
8.4.62 and earlier 8.4.x versions.
8.3.32 and earlier 8.3.x versions.
8.2.93 and earlier 8.2.x versions.
8.1.127 and earlier 8.1.x versions.
8.0.28 and earlier 8.0.x versions.
7.5.187 and earlier 7.5.x versions.
7.4.162 and earlier 7.4.x versions.
7.3.84 and earlier 7.3.x versions.
7.2.97 and earlier 7.2.x versions.
7.1.68 and earlier 7.1.x versions.
7.0.26 and earlier 7.0.x versions.
6.5.55 and earlier 6.5.x versions.
6.4.54 and earlier 6.4.x versions.
6.3.51 and earlier 6.3.x versions.
6.2.26 and earlier 6.2.x versions.
6.1.71 and earlier 6.1.x versions.
6.0.45 and earlier 6.0.x versions.
5.14.25 and earlier 5.14.x versions.
5.13.33 and earlier 5.13.x versions.
5.12.72 and earlier 5.12.x versions.
5.11.52 and earlier 5.11.x versions.
5.10.27 and earlier 5.10.x versions.
5.9.33 and earlier 5.9.x versions.
5.8.30 and earlier 5.8.x versions.
5.7.28 and earlier 5.7.x versions.
5.6.42 and earlier 5.6.x versions.
Most earlier versions are also supported for a direct upgrade, going back to 3.1.0.


UniFi Network Native Application for UniFi OS

A specific application version that is only compatible with the UDM, UDR, UDR7, Express, Express 7, UCG-Ultra, UCG-Max, and UCG-Fiber (running UniFi OS 3.1.6 or newer).

  • The UniFi OS update uses the application version required for your console.
  • The manual update process via SSH requires you to use the compatible package. Incompatible packages will be rejected on installation.
  • Older UniFi OS versions (before UniFi OS 3.1.6) on the UDM and UDR still use regular UniFi Network Application for UniFi OS.

 

 Checksums

9f8f6321395c92067a0806a801c16454 | UniFi-installer.exe
ec16d4742276c6fc616942076b6fdec2 | UniFi-Network-Server.dmg
91fed5070b5cfbcec76a4fb2451a5354 | UniFi.unix.zip
b2258c7c80843b393e702e8be4db3472 | unifi_sysvinit_all.deb
e178ece832675643d11b81157379a619 | unifi-uos_sysvinit.deb
8b7ab8cd0e9e1100bb29c6cfaa73c5e8 | unifi-native_sysvinit.deb
601df32736f41e40a80a3e472450a3e1 | unifi_sh_api


------------------------------------------------------------------------------------------------------------------------


cd0acf467e4e49af0c32fed0bd4b67c392067410cafa6684031e5987a99cbf90 | UniFi-installer.exe
8c11a6a945ebd7c17ea5cf593e19c267bdd04a4374f8ceff439bb4fce4e1dd0b | UniFi-Network-Server.dmg
64416dbcbd767534ad0b51b8f00077aa77aa6a4c9150be0c7a0dcb9aa3672e4c | UniFi.unix.zip
d70b88e8383f70a04486d7282e2a576b5ab85222ada8ea5101cf05174758e53e | unifi_sysvinit_all.deb
9b3de426574baa550e80a96bed5a80a5b05c880af5b8857f15d110b9e73317d8 | unifi-uos_sysvinit.deb
fa49d83d7b16623fdfbcc9382dda642838e609b59e2008f1de976cc1fbd20e93 | unifi-native_sysvinit.deb
1791685039ea795970bcc7a61eec854058e3e6fc13c52770e31e20f3beb622eb | unifi_sh_api
  •  
  • ↗️

UniFi Network Application 10.0.161

✇Network Application
Door: UI-Glenn
1 December 2025 om 11:45

Overview

UniFi Network Application 10.0.161 includes the bug fixes listed below.

Bugfixes

  • Fixed an issue where LAG connections could fail to establish on UXG-Enterprise/EFG in rare cases.
  • Fixed an issue where WAN monitoring wasn't working for DS-Lite over PPPoE in rare cases.

Additional information

  • Create a backup before upgrading your UniFi Network Application if any issues are encountered.
  • See the UniFi Network Server Help Center article for more information on self-hosting a server.
  • UniFi Network Application 7.5 and newer requires MongoDB 3.6 and Java 17.
  • Version 7.5 to 8.0 supports up to MongoDB 4.4.
  • Version 8.1 and newer supports up to MongoDB 7.0.
  • Version 9.0 and newer supports up to MongoDB 8.0 and Java 17/21.
  • UniFi Network Application updates may cause your adopted devices to be re-provisioned.
  • Existing UniFi Network Applications must be on one of the following versions to upgrade directly to this version:
10.0.161 and earlier 10.0.x versions.
9.5.21 and earlier 9.5.x versions.
9.4.19 and earlier 9.4.x versions.
9.3.45 and earlier 9.3.x versions.
9.2.87 and earlier 9.2.x versions.
9.1.120 and earlier 9.1.x versions.
9.0.114 and earlier 9.0.x versions.
8.6.9 and earlier 8.6.x versions.
8.5.6 and earlier 8.5.x versions.
8.4.62 and earlier 8.4.x versions.
8.3.32 and earlier 8.3.x versions.
8.2.93 and earlier 8.2.x versions.
8.1.127 and earlier 8.1.x versions.
8.0.28 and earlier 8.0.x versions.
7.5.187 and earlier 7.5.x versions.
7.4.162 and earlier 7.4.x versions.
7.3.84 and earlier 7.3.x versions.
7.2.97 and earlier 7.2.x versions.
7.1.68 and earlier 7.1.x versions.
7.0.26 and earlier 7.0.x versions.
6.5.55 and earlier 6.5.x versions.
6.4.54 and earlier 6.4.x versions.
6.3.51 and earlier 6.3.x versions.
6.2.26 and earlier 6.2.x versions.
6.1.71 and earlier 6.1.x versions.
6.0.45 and earlier 6.0.x versions.
5.14.25 and earlier 5.14.x versions.
5.13.33 and earlier 5.13.x versions.
5.12.72 and earlier 5.12.x versions.
5.11.52 and earlier 5.11.x versions.
5.10.27 and earlier 5.10.x versions.
5.9.33 and earlier 5.9.x versions.
5.8.30 and earlier 5.8.x versions.
5.7.28 and earlier 5.7.x versions.
5.6.42 and earlier 5.6.x versions.
Most earlier versions are also supported for a direct upgrade, going back to 3.1.0.


UniFi Network Native Application for UniFi OS

A specific application version that is only compatible with the UDM, UDR, UDR7, Express, Express 7, UCG-Ultra, UCG-Max, and UCG-Fiber (running UniFi OS 3.1.6 or newer).

  • The UniFi OS update uses the application version required for your console.
  • The manual update process via SSH requires you to use the compatible package. Incompatible packages will be rejected on installation.
  • Older UniFi OS versions (before UniFi OS 3.1.6) on the UDM and UDR still use regular UniFi Network Application for UniFi OS.

 

 Checksums

1815d521cc1fa263c5feda127cec9fb4 | UniFi-installer.exe
c58f2bbd17f89932eb7e9b31309d26a7 | UniFi-Network-Server.dmg
a3cdde33c51b10acc548ea6ab596484a | UniFi.unix.zip
b44b0ba8cf1b284ac1ed93ba43810f0e | unifi_sysvinit_all.deb
6a4e4e371e70750443c7260a45fbeb10 | unifi-uos_sysvinit.deb
cc91000414966dd34c5eeae9ece287b4 | unifi-native_sysvinit.deb
601df32736f41e40a80a3e472450a3e1 | unifi_sh_api


------------------------------------------------------------------------------------------------------------------------


a61cd0291dd9c887db1d27f17a4f59e08391b1fa19cb4ed4e22181b92edaf02a | UniFi-installer.exe
ed4c737d95c202103910a1d8a97c48722fad75a345005898b11279669d932991 | UniFi-Network-Server.dmg
e39baa6a422c76f792f33a4afb7e287367f1768cc68b6cefb3198530937423f5 | UniFi.unix.zip
be4eedf56451eb904f947b296469a955cd57532fce1c03512694778c8fb6c2d2 | unifi_sysvinit_all.deb
3173d765ca2bb3b718c00f830368ef505f848ae48cc27e4839ac9c4e3f0950fc | unifi-uos_sysvinit.deb
f38f36a94b1f14da16c562a7cb0197397be51e7ccf53e5f7623126a0d48e762a | unifi-native_sysvinit.deb
1791685039ea795970bcc7a61eec854058e3e6fc13c52770e31e20f3beb622eb | unifi_sh_api
  •  
  • ↗️

UniFi Network Application 10.0.160

✇Network Application
Door: UI-Glenn
24 November 2025 om 13:11

Overview

UniFi Network Application 10.0.160 extends the official API, improves the settings user experience, and includes improvements and bugfixes below:

 

  • Improved the WiFi, Hotspot, Network, and Internet settings user experience.
  • Improved Official Network API.
  • Extended scope:
  • Devices - Retrieve unadopted devices and adopt new ones.
  • Networks(VLANs) - Create and Manage VLANs.
  • ACLs - Create and Manage ACLs.
  • Basic supporting APIs.
  • Retrieve the country list.
  • Retrieve application list (DPI apps).
  • Retrieve WANs.
  • Retrieve VPN Servers.
  • Improved API filtering options and error reporting.

Improvements

  • Added support for DS-Lite over PPPoE.
  • Requires UniFi OS 4.4.6 or newer.
  • Added an Additional IPs option to the IPv4 VLAN Network Settings.
  • Added Stats option to Port Manager when viewing All Ports.
  • Added Remove and Pause actions in the Policy Table side panels.
  • Added remote subnet overlapping validation for all Site-to-Site VPNs.
  • Allow switching from All Traffic Flows to Block Traffic only on sites with an EFG or UXG-Enterprise.
  • Allow selecting "Any" and Public IPs for IPv4 ACL Policies.
  • Allow searching the System Logs by VPN Client names.
  • Improved UPS Product user experience.
  • Added support for Auto Recovery power cycle.
  • Added support for pairing with Gateway consoles.
  • Improves paired device shutdown latency.
  • Improved the Dashboard Flows graph.
  • Improved IPv6 address reporting and support.
  • Added IPv6 Prefix to the Internet and Gateway side panel, displaying the prefix obtained from the ISP.
  • Added IPv6 Subnet column to Settings Overview and Networks pages.
  • Adjusted DNS Server validation to allow entering IPv4-mapped IPv6 addresses under Network Settings.
  • Added the Additional IPs option to the VLAN Network IPv6 Settings to add multiple IPv6 addresses, including ULA (Unique Local Address).
  • Added IPv6 Address and IPv6 Link Local columns to the Client Devices page.
  • Improved Site-to-Site VPN validation for Remote Subnets.
  • Improved Application stability and memory usage.
  • Improved Channel AI animation when channels are being improved.
  • Improved validation for QoS policies.
  • Improved the Topology page filtering.
  • Added Vendor and Device type filters.
  • Improved the Ports Filtering user experience.
  • Improved the unavailable channel display in the AirView section.
  • Improved the Graph filtering user experience in the Dashboard.
  • Improved the side panel user experience during sessions.
  • Previously opened side panels will automatically re-open when revisiting sections.
  • Hide Activity Logging Settings when they are supported by the Control Plane.
  • Removed the Legacy Web UI.

Bugfixes

  • Fixed an issue where Client Disconnect Alarm Manager notifications weren't being sent in rare cases.
  • Fixed the inability to create MC-LAG configurations in rare cases.
  • Fixed an issue where the Name Column failed to resize on the Clients page.
  • Fixed an issue where UPS devices could disappear from the Device list in rare cases.
  • Fixed an issue where VPN Client Disconnect events were missing in rare cases.
  • Fixed the inability to create SD-WAN configurations in rare cases.
  • Fixed a rendering issue for the AP Density widget on Safari browsers.
  • Fixed an issue where MC-LAG peers could have different LAG settings applied in rare cases.
  • Fixed an issue where Toast Redirections weren't working in rare cases.
  • Fixed an issue where additional IPs weren't removed from the Gateway IP list.
  • Fixed an issue where the Apply Changes button could be non-responsive in the Network settings in rare cases.
  • Fixed network range validation issues when using SD-WAN.
  • Fixed IPv6 validation for Orchestration networks.

Additional information

  • Create a backup before upgrading your UniFi Network Application if any issues are encountered.
  • See the UniFi Network Server Help Center article for more information on self-hosting a server.
  • UniFi Network Application 7.5 and newer requires MongoDB 3.6 and Java 17.
  • Version 7.5 to 8.0 supports up to MongoDB 4.4.
  • Version 8.1 and newer supports up to MongoDB 7.0.
  • Version 9.0 and newer supports up to MongoDB 8.0 and Java 17/21.
  • UniFi Network Application updates may cause your adopted devices to be re-provisioned.
  • Existing UniFi Network Applications must be on one of the following versions to upgrade directly to this version:
10.0.160 and earlier 10.0.x versions.
9.5.21 and earlier 9.5.x versions.
9.4.19 and earlier 9.4.x versions.
9.3.45 and earlier 9.3.x versions.
9.2.87 and earlier 9.2.x versions.
9.1.120 and earlier 9.1.x versions.
9.0.114 and earlier 9.0.x versions.
8.6.9 and earlier 8.6.x versions.
8.5.6 and earlier 8.5.x versions.
8.4.62 and earlier 8.4.x versions.
8.3.32 and earlier 8.3.x versions.
8.2.93 and earlier 8.2.x versions.
8.1.127 and earlier 8.1.x versions.
8.0.28 and earlier 8.0.x versions.
7.5.187 and earlier 7.5.x versions.
7.4.162 and earlier 7.4.x versions.
7.3.84 and earlier 7.3.x versions.
7.2.97 and earlier 7.2.x versions.
7.1.68 and earlier 7.1.x versions.
7.0.26 and earlier 7.0.x versions.
6.5.55 and earlier 6.5.x versions.
6.4.54 and earlier 6.4.x versions.
6.3.51 and earlier 6.3.x versions.
6.2.26 and earlier 6.2.x versions.
6.1.71 and earlier 6.1.x versions.
6.0.45 and earlier 6.0.x versions.
5.14.25 and earlier 5.14.x versions.
5.13.33 and earlier 5.13.x versions.
5.12.72 and earlier 5.12.x versions.
5.11.52 and earlier 5.11.x versions.
5.10.27 and earlier 5.10.x versions.
5.9.33 and earlier 5.9.x versions.
5.8.30 and earlier 5.8.x versions.
5.7.28 and earlier 5.7.x versions.
5.6.42 and earlier 5.6.x versions.
Most earlier versions are also supported for a direct upgrade, going back to 3.1.0.


UniFi Network Native Application for UniFi OS

A specific application version that is only compatible with the UDM, UDR, UDR7, Express, Express 7, UCG-Ultra, UCG-Max, and UCG-Fiber (running UniFi OS 3.1.6 or newer).

  • The UniFi OS update uses the application version required for your console.
  • The manual update process via SSH requires you to use the compatible package. Incompatible packages will be rejected on installation.
  • Older UniFi OS versions (before UniFi OS 3.1.6) on the UDM and UDR still use regular UniFi Network Application for UniFi OS.

 

 Checksums

40b6863b6af25cc312bac6bfab771c2d | UniFi-installer.exe
7cff9509c2186b73941b6994873df857 | UniFi-Network-Server.dmg
5829b17032192aecfb53c698b424149e | UniFi.unix.zip
d09e7768560a308460e0cf1dadfb61cf | unifi_sysvinit_all.deb
d8f259e3eeedfaf67d92b125c3c82751 | unifi-uos_sysvinit.deb
1cee4d54c90873c3f5fd9d755e24d573 | unifi-native_sysvinit.deb
601df32736f41e40a80a3e472450a3e1 | unifi_sh_api


------------------------------------------------------------------------------------------------------------------------


23de7cd41065ac5bb6059bf6b727cbef9e0c1081c72687a54eac0eb576e9bf8c | UniFi-installer.exe
60cc69a41986004af9ef8fb5c4b6161f4dee41ba83931c7e13cfa71a0e45dcda | UniFi-Network-Server.dmg
8ab56e35cfbde394ca4f107b5c57e377c5991778c1841d7caa2122a7deac5c3d | UniFi.unix.zip
7023c198cc3fac83021b935f5555a980c7e991e6928295d623f696f9ba9263be | unifi_sysvinit_all.deb
9d082bcf198367e6e2669fa134154af6d6cc5ab16671dffcf876f9ad57c271dd | unifi-uos_sysvinit.deb
8c484cfc7556e2606426193361b9d9cbdbf151c36bc3988b64c63d79fd241dfd | unifi-native_sysvinit.deb
1791685039ea795970bcc7a61eec854058e3e6fc13c52770e31e20f3beb622eb | unifi_sh_api
  •  
  • ↗️

UniFi Network Application 10.0.156

✇Network Application
Door: UI-Glenn
19 November 2025 om 16:17

Overview

UniFi Network Application 10.0.156 extends official API, improves the settings user experience, and includes improvements and bugfixes below:


 


  • Improved the WiFi, Hotspot, Network, and Internet settings user experience.
  • Improved Official Network API.
  • Extended scope:
  • Devices - GET unadopted devices, adopt new devices.
  • Networks(VLANs) - Create and Manage VLANs.
  • ACLs - Create and Manage ACLs.
  • Basic supporting APIs.
  • Retrieve the country list.
  • Retrieve application list (DPI apps).
  • Retrieve WANs.
  • Retrieve VPN Servers.
  • Improved API filtering options and error reporting.

Improvements

  • Added support for DS-Lite over PPPoE.
  • Requires UniFi OS 4.4.6 or newer.
  • Improved UPS Product UX
  • Added support for Auto Recovery power cycle.
  • Added support for pairing with Gateway consoles.
  • Improves paired device shutdown latency.
  • Added an Additional IPs option to the IPv4 Network Settings.
  • Added Stats option to Port Manager when viewing All Ports.
  • Added Remove and Pause actions in the Policy Table side panels.
  • Allow switching from All Traffic Flows to Block Traffic only on sites with an EFG or UXG-Enterprise.
  • Allow IPv6 Interface Identifier for Zone-Based Firewall.
  • Allow selecting "Any" and Public IPs for IPv4 ACL Policies.
  • Allow searching the System Logs by VPN Client names.
  • Improved the Dashboard Flows graph.
  • Improved IPv6 address reporting and support.
  • Added IPv6 Prefix to the Internet and Gateway side panel, displaying the prefix obtained from the ISP.
  • Added IPv6 Subnet column to Settings Overview and Networks pages.
  • Adjusted DNS Server validation to allow entering IPv4-mapped IPv6 addresses under Network Settings.
  • Added the Additional IPs option to Network IPv6 Settings to add multiple IPv6 addresses, including ULA (Unique Local Address).
  • Added IPv6 Address and IPv6 Link Local columns to the Client Devices page.
  • Allow IPv6 Interface Identifier for Zone-Based Firewall.
  • Improved Site-to-Site VPN validation for Remote Subnets.
  • Improved Application stability and memory usage.
  • Improved Channel AI animation when channels are being improved.
  • Improved validation for QoS policies.
  • Improved the Topology page filtering.
  • Added Vendor and Device type filters.
  • Improved the Ports Filtering user experience.
  • Improved the unavailable channel display in the AirView section.
  • Improved the Graph filtering user experience in the Dashboard.
  • Improved the side panel user experience during sessions.
  • Previously opened side panels will automatically re-open when re-visiting sections.
  • Hide Activity Logging Settings when they are supported by the Control Plane.
  • Removed the Legacy Web UI.

Bugfixes

  • Fixed an issue where Client Disconnect Alarm Manager notifications weren't being sent in rare cases.
  • Fixed the inability to create MC-LAG configurations in rare cases.
  • Fixed an issue where the Name Column failed to resize on the Clients page.
  • Fixed an issue where UPS devices could disappear from the Device list in rare cases.
  • Fixed an issue where VPN Client Disconnect events were missing in rare cases.
  • Fixed the inability to create SD-WAN configurations in rare cases.
  • Fixed a rendering issue for the AP Density widget on Safari browsers.
  • Fixed an issue where MC-LAG peers could have different LAG settings applied in rare cases.

Additional information

  • Create a backup before upgrading your UniFi Network Application if any issues are encountered.
  • See the UniFi Network Server Help Center article for more information on self-hosting a server.
  • UniFi Network Application 7.5 and newer requires MongoDB 3.6 and Java 17.
  • Version 7.5 to 8.0 supports up to MongoDB 4.4.
  • Version 8.1 and newer supports up to MongoDB 7.0.
  • Version 9.0 and newer supports up to MongoDB 8.0 and Java 17/21.
  • UniFi Network Application updates may cause your adopted devices to be re-provisioned.
  • Existing UniFi Network Applications must be on one of the following versions to upgrade directly to this version:
10.0.156 and earlier 10.0.x versions.
9.5.21 and earlier 9.5.x versions.
9.4.19 and earlier 9.4.x versions.
9.3.45 and earlier 9.3.x versions.
9.2.87 and earlier 9.2.x versions.
9.1.120 and earlier 9.1.x versions.
9.0.114 and earlier 9.0.x versions.
8.6.9 and earlier 8.6.x versions.
8.5.6 and earlier 8.5.x versions.
8.4.62 and earlier 8.4.x versions.
8.3.32 and earlier 8.3.x versions.
8.2.93 and earlier 8.2.x versions.
8.1.127 and earlier 8.1.x versions.
8.0.28 and earlier 8.0.x versions.
7.5.187 and earlier 7.5.x versions.
7.4.162 and earlier 7.4.x versions.
7.3.84 and earlier 7.3.x versions.
7.2.97 and earlier 7.2.x versions.
7.1.68 and earlier 7.1.x versions.
7.0.26 and earlier 7.0.x versions.
6.5.55 and earlier 6.5.x versions.
6.4.54 and earlier 6.4.x versions.
6.3.51 and earlier 6.3.x versions.
6.2.26 and earlier 6.2.x versions.
6.1.71 and earlier 6.1.x versions.
6.0.45 and earlier 6.0.x versions.
5.14.25 and earlier 5.14.x versions.
5.13.33 and earlier 5.13.x versions.
5.12.72 and earlier 5.12.x versions.
5.11.52 and earlier 5.11.x versions.
5.10.27 and earlier 5.10.x versions.
5.9.33 and earlier 5.9.x versions.
5.8.30 and earlier 5.8.x versions.
5.7.28 and earlier 5.7.x versions.
5.6.42 and earlier 5.6.x versions.
Most earlier versions are also supported for a direct upgrade, going back to 3.1.0.


UniFi Network Native Application for UniFi OS

A specific application version that is only compatible with the UDM, UDR, UDR7, Express, Express 7, UCG-Ultra, UCG-Max, and UCG-Fiber (running UniFi OS 3.1.6 or newer).

  • The UniFi OS update uses the application version required for your console.
  • The manual update process via SSH requires you to use the compatible package. Incompatible packages will be rejected on installation.
  • Older UniFi OS versions (before UniFi OS 3.1.6) on the UDM and UDR still use regular UniFi Network Application for UniFi OS.

 

 Checksums

eaa073af7fa404b32efbc7c0f82239a1 | UniFi-installer.exe
69599f25a4af8644641d25792137e5c9 | UniFi-Network-Server.dmg
cd83a1c916a717c724b9e45f3c798cff | UniFi.unix.zip
7da549cc003d15c9776d6219d73b024f | unifi_sysvinit_all.deb
bcc8913aa7bd8f8a36f3698d103db2d0 | unifi-uos_sysvinit.deb
3c6f9ec1c9942a4b13a8a095857c08ca | unifi-native_sysvinit.deb
601df32736f41e40a80a3e472450a3e1 | unifi_sh_api


------------------------------------------------------------------------------------------------------------------------


22fa5fe074a9168d80d9205c75e08c93dbf473529f431541ea299e192503bf63 | UniFi-installer.exe
4e0f94f881e9ba0992572cecff209856f1f1a21af9091644135600080fad28dd | UniFi-Network-Server.dmg
fa59c5f1270cd2fd6c08f358dd45c465e3f5ab8b1775e8a9a5d689933b07d3a6 | UniFi.unix.zip
1655ac0801fa1cdec7ce84cb2444f7e858468bf722e768d23fbd77d9ac8abe90 | unifi_sysvinit_all.deb
69642a2b21bb3073618c724e4ac8b604dfd39c18019485ed2aea284478f2c752 | unifi-uos_sysvinit.deb
4cb89944da1ca21a5746586604a63bde9c1baeed2579249e57e73e43426d5b47 | unifi-native_sysvinit.deb
1791685039ea795970bcc7a61eec854058e3e6fc13c52770e31e20f3beb622eb | unifi_sh_api
  •  
  • ↗️

UniFi Network Application 9.5.21

✇Network Application
Door: UI-Glenn
9 Oktober 2025 om 16:56

Overview

UniFi Network Application 9.5.21 includes the improvements and bugfixes listed below.


 

Added Channel AI

Uses neighboring AP signals to optimize channel distribution. Designed for controlled, very high-density deployments where external interference is limited.

  • Provides a visual channel map for quick insights.
  • Automated optimization ensures balanced channel usage.
  • Requires AP firmware 8.2.14/6.7.31 or newer.


 

Added WiFi Multicast Filtering and VLAN Bridging

Enhances WiFi performance by allowing selective filtering of multicast services to reduce unnecessary airtime usage. Also introduces VLAN Bridging, enabling multicast proxying between VLANs for WiFi clients. VLAN Bridging is available only when the Gateway mDNS Proxy is disabled.

  • Requires UAP firmware 8.2.14 or newer.


 

Improved Port Manager

  • Port AI anomaly reporting – Gain deeper insights into port health with anomaly detection and scoring. In addition to live insights, Port AI now generates a 24-hour Anomaly Score across key categories:
  • Cables & Power.
  • Network Loops & Storm Control.
  • Broadcasts & Discovery.
  • Traffic Path Health.
  • Enhanced Port Details – The side panel now provides richer visibility and context for each port, including:
  • Port status at a glance.
  • Activity logs for anomaly events and admin changes.
  • MAC table displaying currently connected devices.
  • We recommend using UniFi Switch firmware 7.2.123 or newer.


 

Added Default Security Posture Setting (Allow All / Block All)

Introduces a global default security posture with options to Allow All or Block All. Selecting Block All will isolate all newly created VLANs, Ethernet Port Profiles, and devices by default, while existing configurations remain unchanged.

Improvements

  • Added adoption instructions in the Dashboard for UniFi OS Servers.
  • Added support for Auto IPv6 WAN Prefix Delegation Size.
  • Added a banner to Apple TV devices to update their firmware when experiencing connectivity issues.
  • Improved validation for Object-Oriented Networking.
  • Improved the RADIUS Local User management user experience.
  • Improved the NeXT AI Flows filtering user experience.
  • Moved Profiles to Settings Overview.

Bugfixes

  • Fixed an issue where the Objects page could freeze in rare cases.
  • Fixed an issue where the Port Forward overlap validation was incorrectly triggered.
  • Fixed an issue where DS-Lite Auto & MAP-E didn't work with Static and Single Network IPv6.
  • Fixed an issue where deleting a client group or network used in Objects could introduce dead ends.
  • Fixed an issue where Site-to-Site VPN configurations weren't updated when the WAN DHCP IP changed.
  • Fixed an issue where Dashboard WiFi Upload/Download data was shown incorrectly when using a single Radio.
  • Fixed an issue where Firewall rules for NAT IPv6 were incorrectly generated in rare cases.
  • Fixed an issue where SLA profile changes are not provisioned.
  • Fixed an issue where Source NAT didn't use the interface's IPv6 address in Policies/NAT.
  • Fixed an issue where some VLAN Settings were not removed when setting up MC-LAG.

Additional information

  • Create a backup before upgrading your UniFi Network Application if any issues are encountered.
  • See the UniFi Network Server Help Center article for more information on self-hosting a server.
  • UniFi Network Application 7.5 and newer requires MongoDB 3.6 and Java 17.
  • Version 7.5 to 8.0 supports up to MongoDB 4.4.
  • Version 8.1 and newer supports up to MongoDB 7.0.
  • Version 9.0 and newer supports up to MongoDB 8.0 and Java 17/21.
  • UniFi Network Application updates may cause your adopted devices to be re-provisioned.
  • Existing UniFi Network Applications must be on one of the following versions to upgrade directly to this version:
9.5.21 and earlier 9.5.x versions.
9.4.19 and earlier 9.4.x versions.
9.3.45 and earlier 9.3.x versions.
9.2.87 and earlier 9.2.x versions.
9.1.120 and earlier 9.1.x versions.
9.0.114 and earlier 9.0.x versions.
8.6.9 and earlier 8.6.x versions.
8.5.6 and earlier 8.5.x versions.
8.4.62 and earlier 8.4.x versions.
8.3.32 and earlier 8.3.x versions.
8.2.93 and earlier 8.2.x versions.
8.1.127 and earlier 8.1.x versions.
8.0.28 and earlier 8.0.x versions.
7.5.187 and earlier 7.5.x versions.
7.4.162 and earlier 7.4.x versions.
7.3.84 and earlier 7.3.x versions.
7.2.97 and earlier 7.2.x versions.
7.1.68 and earlier 7.1.x versions.
7.0.26 and earlier 7.0.x versions.
6.5.55 and earlier 6.5.x versions.
6.4.54 and earlier 6.4.x versions.
6.3.51 and earlier 6.3.x versions.
6.2.26 and earlier 6.2.x versions.
6.1.71 and earlier 6.1.x versions.
6.0.45 and earlier 6.0.x versions.
5.14.25 and earlier 5.14.x versions.
5.13.33 and earlier 5.13.x versions.
5.12.72 and earlier 5.12.x versions.
5.11.52 and earlier 5.11.x versions.
5.10.27 and earlier 5.10.x versions.
5.9.33 and earlier 5.9.x versions.
5.8.30 and earlier 5.8.x versions.
5.7.28 and earlier 5.7.x versions.
5.6.42 and earlier 5.6.x versions.
Most earlier versions are also supported for a direct upgrade, going back to 3.1.0.


UniFi Network Native Application for UniFi OS

A specific application version that is only compatible with the UDM, UDR, UDR7, Express, Express 7, UCG-Ultra, UCG-Max, and UCG-Fiber (running UniFi OS 3.1.6 or newer).

  • The UniFi OS update uses the application version required for your console.
  • The manual update process via SSH requires you to use the compatible package. Incompatible packages will be rejected on installation.
  • Older UniFi OS versions (before UniFi OS 3.1.6) on the UDM and UDR still use regular UniFi Network Application for UniFi OS.

 

 Checksums

fcfb060da709c8d23272ca0014e27686 | UniFi-installer.exe
a7b77de03b7a1bbb2b805ba615894c9c | UniFi-Network-Server.dmg
6a17206acc5979b9f95f57f84ca1cfe9 | UniFi.unix.zip
f11acf5c475d58d62cb1e70fc18e56b4 | unifi_sysvinit_all.deb
c945a7f884688a9644a60cb2aa236073 | unifi-uos_sysvinit.deb
037e5f7f8469f84043ae83a0aacce190 | unifi-native_sysvinit.deb
601df32736f41e40a80a3e472450a3e1 | unifi_sh_api


------------------------------------------------------------------------------------------------------------------------


b0d01852b40e3cfb6eb9ee0ce9ec0d88cb3c58f06f1c1af100365166a78253b4 | UniFi-installer.exe
75043e132fcc96f7e5d451f14c6aaba8d54b3651769b54fdd37d9d1d5fd66aca | UniFi-Network-Server.dmg
3f4892d0710069be5dacb34997cddfe46e220bca5db429e5388d69cb2b693b13 | UniFi.unix.zip
7da1cc9ab1ae0c8f302c242d622ee52f867457a69116b2aa4c13812e756986af | unifi_sysvinit_all.deb
70ba0531ba375b710d0012430bd2858617bfd30885728d5aa0dbd48fb8bf5364 | unifi-uos_sysvinit.deb
de78182b3a4ab782654d76efa7a28b87eb3cdebabd7ce8193ebca532070cd787 | unifi-native_sysvinit.deb
1791685039ea795970bcc7a61eec854058e3e6fc13c52770e31e20f3beb622eb | unifi_sh_api
  •  
  • ↗️
❌